Honda/Acura Tech Honda tech discussion.

help with coilovers

Thread Tools
 
Old Jan 12, 2011 | 08:27 AM
  #1 (permalink)  
JDMfeining's Avatar
Thread Starter
Registered User
 
Joined: Dec 2010
Posts: 10
Likes: 0
Exclamation help with coilovers

i dont know the brand of the coilover but my car is tooo low i must be stupid cause I cannot figure out how to raise my car up on these things.
I wish these came with instructions.Can someone tell me how to do this, My front tires rub BADLY
Reply
Old Jan 12, 2011 | 09:31 AM
  #2 (permalink)  
b13steve's Avatar
Registered User
 
Joined: Jan 2008
Posts: 583
Likes: 0
From: Lecanto, fl
Default

to make it easier pull the wheel off. you will see 2 rings on the threaded sleeve. if they arelocked together as they should be, you have to move them together to unlock.....the top ring , turn in a loosening motion, and the bottom turn in a tightening motion. they should unlock. then move the top ring all the to the top of the threads ( raising the car ), and repeat with the bottom. put the wheel back on the car and see if the height is where you want it. if not turn the rings down to desired ride height.
__________________
JDMinnovations hollywood, fl
93 del sol.....z6 on 8psi......201...daily beater
91 talon tsi.....25psi.......467...weekend sleeper

I do DP to MP swaps and full obd-1 for EF

352-364-6384
Reply
Old Jan 14, 2011 | 12:48 PM
  #3 (permalink)  
SloCivic's Avatar
Registered User
 
Joined: Feb 2009
Posts: 1,921
Likes: 0
Default

^1 could not say it any better man.
__________________

Reply




All times are GMT -8. The time now is 04:23 PM.