Trying to figure out why I'm not getting fuel Passed my Injectors..Any ideas?

I have fuel pressure/spark...the main relay is good...idk..

 

You need gas in the tank....

 

LOL...

Thanks for the help.. Captain Obvious..LOL.

There IS gas in the tank, btw..

 

Kink in the fuel line, bad filter, any CELs?

 

I'll check and see if I have any codes.

I'm getting fuel to the rail, just not past the injectors...I took off the rail to see if fuel would come out of them after priming the pump, but nothing did. One of the injectors "popped" off the rail cause of the pressure, and shot gas out so I know the Filter/pump/lines are clear...Could the injectors be bad?

I'll get the codes in the morning..

Thanks.

 

You didnt say what motor or Ecu but here is generic print. With key on, test for 12vdc on the Yel/Blk wire. The Ecu provides the ground at different pinount locations for each injector.

 

^^Sorry about that, it's a D16Y7 with a P2E Ecu....

 

Had the same problem with the injectors not squirting. It was at the thermostat ground that I found the problem. For some reason the location it was at before wasnt grounding properly. Moved it to another spot and bam the car is fine.

 

No shit?...LOL...I guess I'm moving mine then...hahaha, that'd be nice if it was something that simple...

Thanks, and rep.

 

Didnt you post up before with a dizzy problem? If moving the ground doesnt work and you dont have injector pulse, it will be a hall effect type sensor in the dizzy causing the issue.