b-series tranny

what would be the best gears to put in it if i had the time/money
for all motor
i will replace everylast gear to achieve the best acceleration for 1/4 times

 

its gunna be all motor ls
like hardcore over 12:1 compression
stg 2 cams
hondata
my dad is building it
but its gunna be my gsr tranny
someone told me b16 or ITR final drive and i should get the LSD for like 300 or so.

 

I would say Si or ITR 1-4th gears, with an LS 5th and a Si/GSR/ITR 4.40 final drive.

 

i looked at some charts and GSR and itr 1st gear are same ratio
im gunna do this
GSR 1st
del sol vtec 2,3,4
LS 5th
itr lsd
i have the 1st and 5th gear so i need 3 gears
and what syncros can i use? can i use the gsr syncros?
and will all these gears fit correctly into the tranny?

 

use the jdm itr final drive (I think it's 4.7). I'm new to the hydro/obd stuff. Also, I think ATS (something like that) has a 4.9. Again, just saying there is stuff like this out there, not that the info is completely correct.

 

ats 1-2, 3-5, 4.9 final, itr limited
Anthony