Dc2 CEL question???
Thread Starter
Registered User
Joined: Aug 2006
Posts: 4,914
Likes: 0
Dc2 CEL question???
Ok i did that paper clip method n turn the key on acc to see if code shows. An the (cel) stay steady on no flash or blinks at all...wat sign is this leading too?
__________________
EG Crew Member #23
EG Crew Member #23
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Look here
Your cel must be on, then you jump the service connector.
If your cel is not on, & you jump the service connector & the cel stays on that means there are no codes.
If the cel is on and you jump the service connector and nothing happens, this generally means the ecu is faulty.
Your cel must be on, then you jump the service connector.
If your cel is not on, & you jump the service connector & the cel stays on that means there are no codes.
If the cel is on and you jump the service connector and nothing happens, this generally means the ecu is faulty.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
A code 1 is an o2 sensor code.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Look here
Your cel must be on, then you jump the service connector.
If your cel is not on, & you jump the service connector & the cel stays on that means there are no codes.
If the cel is on and you jump the service connector and nothing happens, this generally means the ecu is faulty.
Your cel must be on, then you jump the service connector.
If your cel is not on, & you jump the service connector & the cel stays on that means there are no codes.
If the cel is on and you jump the service connector and nothing happens, this generally means the ecu is faulty.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
