ok i bought a jumper harness and i need help on how to hook it up what wires go where im not very good with wiring but i have a friend thats know a lil about it and were trying to figure it out any help you can give i would appreciate it.... this is what it looks like.. i want to run my 28 to it


the car is a 91 ef hatch with a d16z6





Attachment 137044

Attachment 137045

 

we have been trying to see where to wires it dont help the people before he owend it kinda didnt know shit i guess ....with the wiring so it looks really weird....well ive called my friends they said the new harness for the obd0 plug looks altered...we have been at it all day can anyone explain where the wires go or where i can wire them to...thanks alot..

 

dang lol no help

 

First off you are missing a plug for your p28.. there are 3 plugs that go into your p28. The clear factory plug you got there goes to diffrent sensor on your motor. Get a good obd0 to obd1 harness, then you can be pointed in the right direction with your wiring.

 

we have 3 plugs for the obd1 on the harness

 

lol i have it i dont know why it didnt show it up the pic lol

 

http://www.phearable.net/tech/wiring...schematics.gif
This is the pinout for you obd1 ecu. For your first time, look at the clear round plug you have and trace back each wire to the pin on you ecu on the obd1 side. Circle them on the chart along with the color of the wire so you know what wire is what.

http://www.rywire.com/store/images/i...0to1jumper.gif
Once you have all the 9 or 10 wires labeled on the clear round plug then you can use the above link to show you what wire goes to what sensor. In the above link the colors of the wires might be diffrent from what you have (this is why you have to trace them back and label them).

Tip: do not solder/crimp you wires until after you strat your car just incae you have to go back and make changes.

 

how much would someone charge me to do this for me

 

 

someone come wire my car please!!!