What do you guys think the HP limitations are on the Drag Gen. 3 kit..it comes with a T3/T04E turbo i believe....I'd make fuel and internal upgrades also.

 

questions like this are both vague and hard to answer. plus, endless amounts of people seem to ask questions like "how fast will my car be with this?" or "how many horsepower will i have with that?" basically, if you want a response or even a few responses you need to ask specific questions that are tech related.

just to let you know...

 

questions like this are both vague and hard to answer. plus, endless amounts of people seem to ask questions like "how fast will my car be with this?" or "how many horsepower will i have with that?" basically, if you want a response or even a few responses you need to ask specific questions that are tech related.

just to let you know...

 

all iam going to say is the sky is the limit. it all depends on how much you wnat to build it some people can see huge numbers with the kit built for high boost. you can see high 300's possible built even 400's if you dare. it all depends how far you wnat to go.

 

Here let me give it a shot for you ...a t3/4 with a b trim wheel can make a solid 300....but you need this ,[and you need this anyway, do this or you will kick yourself hard!!!!]. New fluidyne radi,tial w/g,BUILD THE ENGINE!!!!!!!!!!!!!!!!!!!. at least eagle sleeves, rods, srp pistons, crower springs/retainers,and a clutch/light flywheel ,better fuel pump and hondata stage 2+b. This will get you 300 all day,no problems,if this is two much for you, you should SERIOUSLY consider a block guard and a good nos system.OR YOU WILL DESTROY YOU ENGINE IN 6,500 MILES, AND YOU PAYED 3,500$ TO DO IT......DDDDDOOOOOHHHHH, have fun.

 

P.S.- your looking at about 6,500$ total.