Honda/Acura Tech Honda tech discussion.

gsr front brake question

Thread Tools
 
Old May 23, 2002 | 08:22 AM
  #1 (permalink)  
CXHatchback's Avatar
Thread Starter
Currently Ballin'
 
Joined: Mar 2001
Posts: 1,113
Likes: 0
Default

Ok I just bought some gsr front brakes with the MC and booster. Ive got a 92 cx with the stock rear drums right now. Since I plan on getting rear discs eventually would it be better to pur the bigger fronts on now or should I wait to get the rears too. And also if I put them on now and leave the rears drums for a while should I change the MC/booster/prop valve? I just want the brakes to be better than what I have now.
Reply
Old May 24, 2002 | 04:43 AM
  #4 (permalink)  
CXHatchback's Avatar
Thread Starter
Currently Ballin'
 
Joined: Mar 2001
Posts: 1,113
Likes: 0
Default

OK well if I do put them on now what MC/Bootser/Prop valve do I use? As in would it be wise to switch them? Thanks

And I paid $150 for the fronts with mc and booster.
Reply
Old May 25, 2002 | 08:28 AM
  #5 (permalink)  
CXHatchback's Avatar
Thread Starter
Currently Ballin'
 
Joined: Mar 2001
Posts: 1,113
Likes: 0
Default

Anyone?
Reply
Old May 25, 2002 | 12:22 PM
  #8 (permalink)  
CXHatchback's Avatar
Thread Starter
Currently Ballin'
 
Joined: Mar 2001
Posts: 1,113
Likes: 0
Default

Cool well I planned on getting the rears eventually so I should hold off on the fronts till then?

One more thing I was looking at part numbers online today and found the calipers from 92-95 Si and 94+ tegs to be the same. So basically my brakes wont be any better than a 92-95 Si correct? More like the exact same thing.
Reply
Old May 26, 2002 | 07:18 AM
  #10 (permalink)  
CXHatchback's Avatar
Thread Starter
Currently Ballin'
 
Joined: Mar 2001
Posts: 1,113
Likes: 0
Default

Alrighty thanks and one more thing if I decide to not do this myself any labor cost approximations?
Reply




All times are GMT -8. The time now is 01:09 PM.