Honda/Acura Tech Honda tech discussion.

91 civic manual rack in a da

Thread Tools
 
Old Feb 2, 2010 | 02:31 PM
  #1 (permalink)  
sullivanracing06's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 1,420
Likes: 0
Default 91 civic manual rack in a da

just wondering if a manual steering rack from a ef civic will bolt/fit in a 90 integra (da)

any one do this before? will the inner/outer tie rods work?


cheers, tom
__________________
Sullivan Racing LLC
352-665-2496-Tom
SullivanRacing06@aol.com


my lag is your courtesy head start


ATTENTION.... installing a head gasket, head studs or pistons and rods in your otherwise STOCK engine dose not make it a "built" engine! stop listing you cars for sale saying they are built when its not!!




Reply
Old Feb 2, 2010 | 04:40 PM
  #2 (permalink)  
custom240sx's Avatar
DC Crew Member #1
 
Joined: Mar 2006
Posts: 3,128
Likes: 0
Default

They fit with stock DA outer tie rods but you have to use a spacer from 2 of the bolts if I remember correctly. It's written up on honda-tech
Reply
Old Feb 6, 2010 | 12:59 PM
  #3 (permalink)  
sullivanracing06's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 1,420
Likes: 0
Default

2 of the bolts? which bolts? the ones that hold the rack up to the rear subframe?

which model opf the ef came with the manual rack?


cheers, tom
__________________
Sullivan Racing LLC
352-665-2496-Tom
SullivanRacing06@aol.com


my lag is your courtesy head start


ATTENTION.... installing a head gasket, head studs or pistons and rods in your otherwise STOCK engine dose not make it a "built" engine! stop listing you cars for sale saying they are built when its not!!




Reply
Old Feb 6, 2010 | 03:40 PM
  #4 (permalink)  
custom240sx's Avatar
DC Crew Member #1
 
Joined: Mar 2006
Posts: 3,128
Likes: 0
Default

As far as I know all the EF's had manual racks but to be certain any basemodel EF will have it. I do believe it is the rear bolts but like I said check on honda-tech because I know there was a write up on it.
Reply
Old Feb 7, 2010 | 12:45 PM
  #5 (permalink)  
sullivanracing06's Avatar
Thread Starter
Registered User
 
Joined: Apr 2009
Posts: 1,420
Likes: 0
Default

alrite, ive been wanting to switch to the manual rack and ditch the pwr rack that s disconnected.
__________________
Sullivan Racing LLC
352-665-2496-Tom
SullivanRacing06@aol.com


my lag is your courtesy head start


ATTENTION.... installing a head gasket, head studs or pistons and rods in your otherwise STOCK engine dose not make it a "built" engine! stop listing you cars for sale saying they are built when its not!!




Reply
Old Feb 8, 2010 | 06:28 AM
  #6 (permalink)  
juiced2ndgenteg's Avatar
.........................
 
Joined: Apr 2003
Posts: 3,562
Likes: 0
Default

I put a manual CRX rack(pretty sure a 91 civic is the same) in my DA like 6yrs ago. I know it went smoothly, no major problems swapping them.
Reply




All times are GMT -8. The time now is 06:14 AM.