Hey TR, I have a CRX with a JDM B16a and when I turn right my axle clicks (i think it's the left axle?) So I was wondering if I could just go down to my local auto parts store and buy 99-00 Si axles, or do I have to get "special" ones? Any help is appreciated and rep will be given! Thanks.

 

You have to use axles from DA or get it rebuilt?

I have a pair of rebuilt axles 0miles.$80 bucks..

lmk.

 

Yea, DA axles only (90-93 integra)

 

https://www.tamparacing.com/forums/t...unity-com.html

 

also it depends what half shaft your running becasue when i had rex with a gsr in it i used a hydro half shaft and i used 94 gsr axels

 

I think the hub end is different between the DA's and DC's. Your better off using the correct halfshaft.

 

bring it with you. you will either want 90-93 integra or 94+ integra depending on gender. IF you have an original CRX engine AND the stock intermediate shaft was used you will need 90-93 but theres no way to tell without getting under there.

 

So I should just pull the axles off of there and take them to the store with me and just compare them?

 

Yes do that ....there are no difference in DA or DC axles on the passenger side....drivers side makes the difference.......

 

Ok that's what I'll do. Thanks for the help TR.