need my car wire tucked
Thread Starter
JdM Thugg
Joined: Oct 2007
Posts: 747
Likes: 0
need my car wire tucked
my motor is coming out this weekend and another one is going in i have 99 civic si im looking for some1 to come do a cheap wire tuck in my car i live in clearwater is there anyone that can come do this cheap?
Smith & Wesson Protected.
Joined: Apr 2006
Posts: 3,617
Likes: 0
Cheap wire tuck? 
__________________
-Induction Performance
ALPHA Tuned.
-ROQUE MACHINE SHOP For ALL your fabrication needs.
-Induction Performance
ALPHA Tuned.-ROQUE MACHINE SHOP
For ALL your fabrication needs.
35.5 psi, stock sleeves
Joined: Jan 2005
Posts: 1,834
Likes: 0
Can be done but not for 150.
Good luck
Good luck
__________________
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
Registered User
Joined: Apr 2009
Posts: 1,420
Likes: 0
150 for a wire tuck?
what they run the injector wires under the fuel rail and take your 150, thats some half ass butt connector job
what they run the injector wires under the fuel rail and take your 150, thats some half ass butt connector job
__________________
Sullivan Racing LLC
352-665-2496-Tom
SullivanRacing06@aol.com
my lag is your courtesy head start
ATTENTION.... installing a head gasket, head studs or pistons and rods in your otherwise STOCK engine dose not make it a "built" engine! stop listing you cars for sale saying they are built when its not!!
Sullivan Racing LLC
352-665-2496-Tom
SullivanRacing06@aol.com
my lag is your courtesy head start
ATTENTION.... installing a head gasket, head studs or pistons and rods in your otherwise STOCK engine dose not make it a "built" engine! stop listing you cars for sale saying they are built when its not!!
Smith & Wesson Protected.
Joined: Apr 2006
Posts: 3,617
Likes: 0
Trust me I don't wanna sound like a asshole but even doing it your self properly is over 300 for the materials. Don't skimp on something so important as your wiring harness. Could turn out dangerous.
__________________
-Induction PerformanceALPHA Tuned.
-ROQUE MACHINE SHOP For ALL your fabrication needs.
-Induction Performance
ALPHA Tuned.-ROQUE MACHINE SHOP
For ALL your fabrication needs.
TR Balla Donor Supreme
Joined: Mar 2004
Posts: 720
Likes: 0
how the hell do you spend over $300 dollars doing it yourself i have spools of wire ,a hakko soldering iron and heatshrink that didnt cost me anything ....what else is there besides being time consuming i dont get why people make such a big deal over doing it or why people spend so much...
__________________
REACH ME @ 813-952-3833 JOE
