Honda/Acura Tech Honda tech discussion.

need a little advise on my turbo setup

Thread Tools
 
Old Oct 3, 2009 | 01:52 PM
  #1 (permalink)  
whiplash129292's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 487
Likes: 0
Default need a little advise on my turbo setup

i have a jdm d15 vtec
currently im running 4 psi off the wastegate, with a p08 ecu, stock injectors
I am wondering if i was fine to drive it like it is for a week, the map sensor isnt reading the boost so if i get on it a little bit it goes into safe mode.

i appreciate it guys for advise

let me know if you need more information than that, thanks
Reply
Old Oct 3, 2009 | 02:11 PM
  #2 (permalink)  
custom240sx's Avatar
DC Crew Member #1
 
Joined: Mar 2006
Posts: 3,128
Likes: 0
Default

Just don't let it go into boost at all...drive very easy and you should be fine. Get it tuned with the right injectors though ASAP
Reply
Old Oct 3, 2009 | 03:42 PM
  #3 (permalink)  
whiplash129292's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 487
Likes: 0
Default

yea i have injectors and fuel rail just didnt put it on because im only running 4 psi and on stock ecu, so im not dumping useless fuel into it.

as for a tune do i need to get a dyno tune? wheres the best place to go?
Reply
Old Oct 3, 2009 | 04:58 PM
  #4 (permalink)  
custom240sx's Avatar
DC Crew Member #1
 
Joined: Mar 2006
Posts: 3,128
Likes: 0
Default

Street tune or dyno tune...contact mtber or jap or alpha on here...all do good jobs of tuning and can get you all set up.
Reply
Old Oct 8, 2009 | 07:05 AM
  #5 (permalink)  
MightyMaxGS-T's Avatar
Registered User
 
Joined: Sep 2003
Posts: 1,970
Likes: 0
Default

you need some injectors sir, i have a set of prelude 310cc if you need them, i would go bigger tho.
__________________

PM me for any AC, audio, and wiring work on your vehicle. Including but not limited to car audio, alarms, gauge installs, custom clusters, full troubleshooting, big/dual fuel pump relay kits, battery relocation, factory radio iPod and amplifier integration, custom harnesses, and custom standalone ecu installs and much more! If you need it done, we can do it! Don't be afraid to inquire!
Reply
Old Oct 8, 2009 | 03:16 PM
  #6 (permalink)  
custom240sx's Avatar
DC Crew Member #1
 
Joined: Mar 2006
Posts: 3,128
Likes: 0
Default

If your talking peak and hold prelude injectors they are 345cc and they worked fine on my b20b boosted to 7psi
Reply
Old Oct 8, 2009 | 03:50 PM
  #7 (permalink)  
whiplash129292's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 487
Likes: 0
Default

i have dsm 450cc injectors, not putting them on until i get a tune
Reply




All times are GMT -8. The time now is 10:23 PM.