Honda/Acura Tech Honda tech discussion.

B18B1 Help!

Thread Tools
 
Old Sep 2, 2009 | 03:38 AM
  #1 (permalink)  
DenSi's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 177
Likes: 0
Exclamation B18B1 Help!

I changed my oil lastnight and now my car wont start after i ran it. i was running it and i pushed it to about 5kRPM's and it started bogging and it just died. we thought it was the battery so we let it charge from another car battery but it still wont start, we tried to start it from a roll and it didnt work. any ideas on the problem that might have cause this? nothings leaking or anything everything seems fine in the Engin bay, it's just it wont start.


Thanks in Advance.
Reply
Old Sep 2, 2009 | 05:02 AM
  #2 (permalink)  
Old Renegade's Avatar
Cool Runnings
 
Joined: Dec 2002
Posts: 4,394
Likes: 0
Default

chech for spark, may be a dizzy related issue. take of the dizzy cap and make sure the rotor is on. also what chasis is the car ef, da, eg, dc, ek and such..
__________________
Paintball marker and equipment for sale below
http://www.tampaforums.com/forums/sp...extras-344168/

She can pop it she can lock it ........ I'M IN LOVE WITH A HONDA


R.I.P. DELROY MANDERSON SR. 1-30-73 ~ 9-19-02

THE FEW
THE STRONG
THE BRAVE
NATURALLY ASPIRATED

TR "OLD SKOOL EF MEMBER" #05
Reply
Old Sep 2, 2009 | 05:18 AM
  #3 (permalink)  
extatic002's Avatar
is an asshole
 
Joined: Jun 2006
Posts: 1,704
Likes: 0
Default

did you put the drain plug back in?



__________________




Originally Posted by The Kyle
I quit every time I run out.
Then I quit quitting every time I get more.

Originally Posted by Clawhammer

As a general rule of thumb; if I can't fix it with a hammer it must be an electrical problem.
Reply
Old Sep 2, 2009 | 07:32 AM
  #4 (permalink)  
Nandosol's Avatar
Garage Slut
 
Joined: Dec 2004
Posts: 760
Likes: 0
Default

CELs? Does it turn over at all?

spark/fuel/compression
Reply
Old Sep 2, 2009 | 12:35 PM
  #5 (permalink)  
rangcrx's Avatar
engine building &best
 
Joined: May 2003
Posts: 11,971
Likes: 0
Default

like they said not sure why you would but if you took the spark plug wires off did you put them back in the right order?
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?

175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!

how many speed holes do i need in my bumper,b4 i can run 15's?
Reply
Old Sep 3, 2009 | 06:17 PM
  #6 (permalink)  
DC2_BoostKING's Avatar
CRAWFORD BUILT
 
Joined: Mar 2009
Posts: 1,085
Likes: 0
Default

did you use synthetic? you could have oil in the combustion chamber due to old rings, and putting new (syn) oil will cause it to get past the rings and to bog and run like shit. try pulling the plugs and checking to see how fowled they are and stick a light in the combustion chamber to check for oil.
__________________
CRAWFORD BUILT

Gainesville Crew Member #1
DC Crew Member #23
Reply
Old Sep 8, 2009 | 02:20 AM
  #7 (permalink)  
4DRintegraT's Avatar
Registered User
 
Joined: Sep 2007
Posts: 915
Likes: 0
Default

check your grounds coming off the wiring harness... and like stated above.. spark and fuel. then if ur gettin both of them. check the compression
__________________
Rep is Returned
Acura
Reply




All times are GMT -8. The time now is 06:17 AM.