Does anyone have a breaker bar????
Does anyone have a breaker bar that aleast like 3 ft long that i maybe able to barow so i can get my front struts done?
__________________
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
Guest
Posts: n/a
you can find the piping for one at most hardware stores just ask them where there conduit (pronounced con-do-it) is and look for a piece about 1 in diameter and 3 or more feet long. Should be less than $10. Have fun with the install Id come by to help ya out but Im in ocala till monday.
is your junk rusted on. i had the same problem but i had to replace the lower strut tower and control arm. its a bitch. i know what you are going through. you might need to get an impact wrench or go to a shop that is really close and have the get it knocked loose if its easy to get to.
are you replacing the cv axles?
are you replacing the cv axles?
__________________
If you have three quarters, four dimes, and four pennies, you have $1.19. You also have the largest amount of money in coins without being able to make change for a dollar.
If you have three quarters, four dimes, and four pennies, you have $1.19. You also have the largest amount of money in coins without being able to make change for a dollar.
j99 would you maybe be willing to let me use it on monday weather permitting i just need one because they torqued it on there really fucking good and cant get it off just to do those front struts!!!!
__________________
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
the breaker bar was the best investment i ever made 12.99 from the flea market saved my hiney a few times if you want to borrow it ask j99jm or justin i dont know where my shop key is
__________________
grow vtec
grow vtec
hey man thanks alot for the offer i just went and got one at the auto zone
anyway what shop do you own
anyway what shop do you own
__________________
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
REPRESENTING PORTLAND OREGON THE WEST COAST TR MEMBER
I have seen people use a 4 foot metal pipe to slid over a large SEARS breaker bar. Man I have never seen anything work sooo good in my life!
__________________
AIM: jasonbadler
813.508.PLAN (7526)
TR Notary Crew: #001
--------------
AIM: jasonbadler
813.508.PLAN (7526)
TR Notary Crew: #001
--------------
Guest
Posts: n/a
my breaker bar is 5ft never found a bolt that it couldnt get undone and it got me on a first name basis with the sears guy in the tool department one month last year I was in there almost every 3 days for almost a month with broken ratchets and sockets gotta love craftsman its breaks the least and has the best warrenty.
Originally posted by "Someone"
Originally posted by b16a2pwr
I have seen people use a 4 foot metal pipe to slid over a large SEARS breaker bar. Man I have never seen anything work sooo good in my life!
Originally posted by b16a2pwr
I have seen people use a 4 foot metal pipe to slid over a large SEARS breaker bar. Man I have never seen anything work sooo good in my life!