So i have a 98 integra with a gsr engine i installed a greddy turbo kit with stock internals and 310 injector skunk 2 intake manifold with stock ecu and the greddy fcu.....i blew the motor and upon taking it apart i crack all four pistons on the intake side and luckely did not scrach the piston walls...i replace the block any how and replaced the rod bearing and piston rings and put an ls crank rods and pistons in the new gsr block i also picked up 440 injectors. what should i do to make this car run more reliable since it is my fist turbo setup and were can i get a tuner to tune it i called phearable tunnig numerouse of time and got no feed back....

 

I returned your call & your wife/girlfriend answered.
I informed her to ask you to call me back.

Call me at 1-888-236-9831 (leave a voicemail)

 

getting a tune is a hard deciscion something i am dealing with now!

 

Contact Alpha or Jap and get that car tuned properly

 

sorry about the miss communication i asked if she called and she never relayed the message (women) i live in the hernando area and also i have a chipped ecu and wanted to see if it could be street tuned and also what injector size would be good for this application...this car is being sold and i want it to be a reliable turbo setup the motor is sound and strong with no check engine lights so im confident that its a sound motor....

 

contact info for jap and alpha please/link

 

You can find other tuners in the area here:
https://www.tamparacing.com/forums/h...directory.html

My tuning rates are on Phearable.net - Electronic Fuel Injection Tuning Solutions - Hondata, Neptune, Crome, Uberdata, Ectune, AEM, Honda Tuning, Widebands, Fuel Pumps, Intercoolers, Turbos, LS/VTEC, ECU Chipping, Chipped Ecus, P28