Honda/Acura Tech Honda tech discussion.

Starting issues with my DA..NEED HELP!!!

Thread Tools
 
Old May 11, 2009 | 11:12 AM
  #1 (permalink)  
gabriel93's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 8
Likes: 0
Default Starting issues with my DA..NEED HELP!!!

I have a 93 integra LS, i was driving the other day and the car turn off on me, i cheked the engine and changed the distributor cap and distributor rotor, it worked and then hrs later it did the same thing when i was leaving work...what could this be?? The car wants to start but wont do so, do i need a new distributor?? spark plugs are new and so are the wires as well...also theres oil leaking from the distributor.
Reply
Old May 11, 2009 | 11:38 AM
  #2 (permalink)  
Scott90's Avatar
Ecotec y0!
 
Joined: May 2006
Posts: 2,406
Likes: 0
Default

start from the basics....

-check your gas gauge (seriously)
-check all grounds
-check battery, starter, and alternator (all can be done for free)
-Check IACV (check and clean it anyways)
-THEN check plugs, wires, cap, rotor, those items.

those couple things right there should diagnose something. good luck
__________________
"Decide what you want, decide what you are willing to exchange for it. Establish your priorities and get to work."
Reply
Old May 11, 2009 | 11:50 AM
  #3 (permalink)  
gabriel93's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 8
Likes: 0
Default

ok and wheres the IACV?
Reply
Old May 11, 2009 | 12:19 PM
  #4 (permalink)  
thegoldenchild's Avatar
 
Joined: Sep 2006
Posts: 645
Likes: 0
Default

Reply
Old May 11, 2009 | 12:21 PM
  #5 (permalink)  
thegoldenchild's Avatar
 
Joined: Sep 2006
Posts: 645
Likes: 0
Default

looks like this when its off the manifold, (sample picture )

Reply
Old May 11, 2009 | 12:24 PM
  #6 (permalink)  
gabriel93's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 8
Likes: 0
Default

ill try looking for that =( ..you think that the oil leak from the distributor might be causing the problem?? before the car was running good
Reply
Old May 11, 2009 | 12:25 PM
  #7 (permalink)  
thegoldenchild's Avatar
 
Joined: Sep 2006
Posts: 645
Likes: 0
Default

replace the distributor o-ring
Reply
Old May 11, 2009 | 12:28 PM
  #8 (permalink)  
gabriel93's Avatar
Thread Starter
Registered User
 
Joined: May 2009
Posts: 8
Likes: 0
Default

ok kool ill get the O ring hopefully this works..another question i dont have that ground cable that goes from the motor to the front it was driving like that is that an issue?
Reply
Old May 11, 2009 | 01:00 PM
  #9 (permalink)  
thegoldenchild's Avatar
 
Joined: Sep 2006
Posts: 645
Likes: 0
Default

put one on
Reply
Old May 11, 2009 | 01:31 PM
  #10 (permalink)  
K20A2's Avatar
OH LAWD JESUS ITS A FIRE!
 
Joined: Aug 2006
Posts: 13,977
Likes: 0
Default

The o ring isn't going to stop the car from starting,neither with the IACV.
__________________
"You can always count on the Americans to do the right thing - after they have tried everything else."

-Winston Churchill
Reply



All times are GMT -8. The time now is 06:55 AM.