boosted ek problems
ok so i have a 96 ek. its got the non vtec y7. ill start with the set up. its pushing 4 pounds at the moment. but if i get on it in 1st it breaks up soooo bad and i go no where. now lets say i and stoped or have clutch in and i give it a little gas, it acts like it has 2 step bouncing from 1.5k to 2k. same if im at a stop and start to take off in 1st(normally) with a little gas it pulses and its feels like im going up and down with the gas. what can it be? it has a stock map! and still obd2
__________________
Your still obd2 & the car isn't tuned. Those are your problems.
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
You're running obd2, go obd1-chipped. 96` has 240cc injectors, your running MADD lean. Run a smaller gap on those plugs. And if you dont know what your doing like most the people on here, go to phearble.net. I build and tune my own shit, but hey, its not for everybody. G/L
^ i know what im doing just new to the turbo game i was in to the all motor. but trying out the turbo set up. im running on 450cc dsm injectors. and im in the process of looking for a jumper harness. ill post up the up dates
__________________


