Ok i was thinking about swapping a gsr in my ls. It will come with the ecu and engine harness which is only the under hood harness correct me if im wrong. Now for this swap wouldnt i need the complete and full harness because of vtec or is the engine harness all i need?

 

well u r going to need to wire from the back of the wire harness. meaning from the ecu to the harness hook-up. cause honda mass produce our cars so it is missing the wires that goes for ur vtech motor. it's not much but just a lil bit of wiring. g/l

 

I believe i could understand what your saying. That would be a little bit of a pain in the ass.

 

well the good thing is that there are some really good wire guys on here so ask around i just put up a post for something of the same thing so if i find someone i'll send them ur way.

 

its very easy to do, i can email you info if you need it

 

That would be greatly appreciated. skunk2_powered_teg@yahoo.com. Thanks once again

 

Thanks man. I appreciate all the help i get from this site.

 

what year is your car and ecu?

 

Its a 96 integra. Should i do an obd1 or obd2 gsr swap?

 

obd1 ftw