Honda/Acura Tech Honda tech discussion.

might sell my 1st gen crxSI b16....

Thread Tools
 
Old 11-01-2001, 06:07 PM
  #1 (permalink)  
art
E=MC-hammer
Thread Starter
 
art's Avatar
 
Join Date: Jul 2001
Posts: 3,153
Likes: 0
Received 0 Likes on 0 Posts
Default

well as you can see im thinking about selling my b16 crx si I
still have to finish it iv done the disk brake upgrade in the
rear as well as the rear axle and sway bar and KYB stuts
and the very hard to find 4 way speaker set up (factory) as
well as many other things I just wanted to get the word out
befor I post it
thanx art
__________________
IM IN VA BITCH!!!!!!

www.rccustomz.com
Old 11-02-2001, 04:12 PM
  #3 (permalink)  
art
E=MC-hammer
Thread Starter
 
art's Avatar
 
Join Date: Jul 2001
Posts: 3,153
Likes: 0
Received 0 Likes on 0 Posts
Default

well I still have to finish it....price wise Im thinking around
4.5k o.b.o. this sunday I should be able to it cranked over I
still have to put in the integra seats and put in brake fluid
and the coolent lines and a few other small things but
anyway this was my 9.5sec project I also have the factory
engine it has about 40k miles on it and I built it up to top out
at 150mph I only did this 2 times it ran smooth as hell!!! I
have found mods for the factory engine to add a turbo for
around $150 at the parts yard it can be a very strong 10-11
sec. engine I opted for the B16 due to the fact that you can
pull a few more hp out of the dohc engine but any way if you
want more info just let me know
thanx
art
__________________
IM IN VA BITCH!!!!!!

www.rccustomz.com
Old 11-04-2001, 02:58 PM
  #4 (permalink)  
art
E=MC-hammer
Thread Starter
 
art's Avatar
 
Join Date: Jul 2001
Posts: 3,153
Likes: 0
Received 0 Likes on 0 Posts
Default

ok i did a typo....I put 4.5k for the car it should have been
$3.5k obo. my bad I have found out that I dont have the time
to complet this car so if you want it by all means let me know
i also am tossing in the Si engine the car needs things like
the engine wirieing harness plugs to be changed about
2hrs as well as the E-brake cables need to be changed for
the disk brake convertion and a few other small things the
car needs paint no big deal also I have all the parts for the
rest of it just no time also the car will have to be picked up
its almost to running condition but as you can see no time to
connect the harness=no start
anyway if you need more info let me know
art
__________________
IM IN VA BITCH!!!!!!

www.rccustomz.com




All times are GMT -8. The time now is 02:18 PM.