i was replacing my back springs and shocks and the lower bolt head snapped off, then i said fuck it then took a sawzall and cut off the legs that the bolt goes through in hopes the i could just knock the screw out. didnt work to say the least. so basically i got a bolt through my lower arm and now i cant get it out, i need the car for a DD and help would be much appreciated and rep will be given

 

exact same thing happened on a civic i was putting lowering springs on. what i ended up doing was just drilling out all of the bolt straight through and since i drilled the bolt and threads i ended up putting a new bolt and nut through it. make sure to use an electric powered drill and a damn good bit or an air powered one would be better. im sure someone will have a beter solution. just giving an option.

 

heat up the rubber bushing it goes through and knock it out & replace the rubber bushing and get a new bolt. Since it is stuck Im pretty sure the rubber bushing needs to be replaced anyways.
Gearhead performance usually has them in stock

 

thanks but the other side did the same, id like to get the bolt out with out having to cut the other shock. any ideas?

 

bumper

 

bump help pleeeeaase

 

buuuuuumpo

 

Get a torch heat the bolt on the shock and get an impact and it will snap it. Take the LCA off if you dont have the means to drillit out take it to a shop they will do it for a small fee.