Need Help Wiring Up VTEC (Bought Subharness)
Well, Bought Another Pressure Switch, Still No VTEC!
Well, I just recently bought another pressure switch (was time for one anyway) and I noticed I was still having the same CEL's. So I called a friend (Shayne from Lakeland) and asked him WTF was up. He said take out the hazard light fuse to reset the ECU, so I did, and no CEL!!!. So I take the car around the block (mind you, I have everything hooked up but the knock sensor, at operating temperature and all) and I get to 5500, no VTEC!!!!
WTF do I do now?
WTF do I do now?
__________________
Nikon D7000 | 18-55mm kit lens | 55-200mm VR | 50mm 1.8G |
GoPro Hero 3 Black Edition
Nikon D7000 | 18-55mm kit lens | 55-200mm VR | 50mm 1.8G |
GoPro Hero 3 Black Edition
Last edited by Kamikaze; 07-27-2008 at 09:52 AM. Reason: New topic.
Everything you need including how to bypass vtec pressure switch is on Phearable.net - Electronic Fuel Injection Tuning Solutions - Hondata, Neptune, Crome, Uberdata, Ectune, AEM, Honda Tuning, Widebands, Fuel Pumps, Intercoolers, Turbos, LS/VTEC, ECU Chipping, Chipped Ecus, P28
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
My question is the actual connection to that tab, like how the heck am I going to feed it into the connector plug that I have when it doesn't have one? It's the same as the Rywire sub harness but my solenoid doesn't have a connector on it. Just that wire hanging from it... I've checked your site multiple times, maybe I'm just not going to the right area...
you may need to buy a new sensor because that one is pretty FUBARed!!
__________________
"The richest man is not he who has the most, but he who needs the least."
"The richest man is not he who has the most, but he who needs the least."
TR "Old Skool DA" Member #28
I know the sensor is, I posted that.... I'm talking about the solenoid.. Look closely at the picture again of the wire coming off the solenoid, if I have to, I'll get a closer pic for you
You have no connectors for your solenoid or vtec pressure switch. Simply directly wire it or get a plug from a bad solenoid etc...
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
put one of these on the solinoid and put the other end on the harness you bought
RadioShack.com - Cables, Parts & Connectors: Connectors & connectivity: Crimp connectors & terminals: Insulated Heat-Shrink Disconnectors (8-pack)
done
RadioShack.com - Cables, Parts & Connectors: Connectors & connectivity: Crimp connectors & terminals: Insulated Heat-Shrink Disconnectors (8-pack)
done
Yeah... nice of you to let me know that...