Honda/Acura Tech Honda tech discussion.

front end shakes

Thread Tools
 
Old Apr 15, 2008 | 08:57 AM
  #1 (permalink)  
97HATCHY's Avatar
Thread Starter
Banned
 
Joined: Aug 2006
Posts: 5,367
Likes: 0
Default front end shakes

ok my car for some reason gets a funny shake only when im on the gas in 1st and 2nd by 3rd you dont feel it or if you baby the gas you dont feel it.
someone said i have bent rims so i swaped rims and still shakes.
also when my axles were bad(c-v joints clicking) i didnt notice it as much but now that ive swapped axles it seems worst. so where should i go next if its not the rims or axles?

*edit* ive also had an alinment done
Reply
Old Apr 15, 2008 | 09:13 AM
  #2 (permalink)  
Thatguysstuff's Avatar
Hey its that guy!!
 
Joined: Apr 2006
Posts: 8,751
Likes: 0
Default

Sounds like a bad Cv...

i had one that popped out of one of the ends so the bearings where not in the right place..
__________________
Reply
Old Apr 15, 2008 | 09:22 AM
  #3 (permalink)  
rangcrx's Avatar
engine building &best
 
Joined: May 2003
Posts: 11,971
Likes: 0
Default

upper control arms
__________________
i love AUTOZONE
MY CAR iS PROTECTED BY ZOOMBAK GPS LOCATOR IS YOURS?

175+served in engines built from minime to gsr/lsvtec,b16 b20vtec,d15 k24 powerhouses or just rebuilds.life is good
i like when people don't take my advice.cause then i make more money when u need it rebuild the right way!

how many speed holes do i need in my bumper,b4 i can run 15's?
Reply
Old Apr 15, 2008 | 10:31 AM
  #4 (permalink)  
dscivicdx's Avatar
TR Balla Donor Supreme
 
Joined: Aug 2001
Posts: 2,923
Likes: 0
Default

could also be control arm bushings.
Reply
Old Apr 15, 2008 | 11:21 AM
  #5 (permalink)  
ACCLUDE22's Avatar
Registered User
 
Joined: Mar 2008
Posts: 83
Likes: 0
Default

I Had A 93 Eg Coupe With Bad Ball Joints And The Front Was Shakeing !!!!! (put Your Tire C If It Moves Or Got Any Slack
Reply
Old Apr 15, 2008 | 11:26 AM
  #6 (permalink)  
sleepinsol's Avatar
starting over
 
Joined: Aug 2006
Posts: 5,466
Likes: 0
Default

sounds like one of the cv's u put in is bad. possibly the driver side one. my car shook under load like that. i replaced the driver side axel with a new one and its gone now.
__________________




RIP PABLO AKA FATHEAD.....YOU WILL BE MISSED!
Reply
Old Apr 15, 2008 | 11:32 AM
  #7 (permalink)  
97HATCHY's Avatar
Thread Starter
Banned
 
Joined: Aug 2006
Posts: 5,367
Likes: 0
Default

^ i use the rebuilt ones from autozone but ive gone through 4 sets now and it still shakes
Reply
Old Apr 15, 2008 | 11:35 AM
  #8 (permalink)  
97HATCHY's Avatar
Thread Starter
Banned
 
Joined: Aug 2006
Posts: 5,367
Likes: 0
Default

Originally Posted by rangcrx
upper control arms
but like what bent?
Reply
Old Apr 15, 2008 | 12:59 PM
  #9 (permalink)  
Thatguysstuff's Avatar
Hey its that guy!!
 
Joined: Apr 2006
Posts: 8,751
Likes: 0
Default

check the upper ball joints...

ive seen that happen to....

better fix the vibration soon.. or it will kill your wheel bearings..
__________________
Reply
Old Apr 15, 2008 | 03:56 PM
  #10 (permalink)  
97HATCHY's Avatar
Thread Starter
Banned
 
Joined: Aug 2006
Posts: 5,367
Likes: 0
Default

^ it probably already did i beat the crap out of it cause it pisses me off
Reply



All times are GMT -8. The time now is 12:34 PM.