dyno results for the ls v!!!
Thread Starter
starting over
Joined: Aug 2006
Posts: 5,466
Likes: 0
dyno results for the ls v!!! updated**chart inside**
went to the dyno day today....pulled about 177hp and 128 tq at vegas place. mods are:
b18b1 block
usdm itr pistons
shot peened n polished ls rods
arp rod bolts
new clevite bearings
STOCK gsr head
golden eagle kit
hytech replica header
3'' id short ram intake
2.5" exhaust with a thrush turbo style muffler
arospeed adj cam gears (+2 intake -1 exhaust)
skunk 2 intake mani
only tuning it has seen was with a zeitronix wideband/datalogger and the free version of crome. i only tuned the air/fuels and started with a 2.0l jdm b16 map. they were between 12.9 and 13.4 on my wideband. they were slightly leaner on the dyno wideband. vtec was set at 5k bc it was easiest for me to tune there. it needs more tuning but im proud of my work!!!
the first run the motor was a little cold. the second run was the money run!!!
b18b1 block
usdm itr pistons
shot peened n polished ls rods
arp rod bolts
new clevite bearings
STOCK gsr head
golden eagle kit
hytech replica header
3'' id short ram intake
2.5" exhaust with a thrush turbo style muffler
arospeed adj cam gears (+2 intake -1 exhaust)
skunk 2 intake mani
only tuning it has seen was with a zeitronix wideband/datalogger and the free version of crome. i only tuned the air/fuels and started with a 2.0l jdm b16 map. they were between 12.9 and 13.4 on my wideband. they were slightly leaner on the dyno wideband. vtec was set at 5k bc it was easiest for me to tune there. it needs more tuning but im proud of my work!!!
the first run the motor was a little cold. the second run was the money run!!!
__________________
RIP PABLO AKA FATHEAD.....YOU WILL BE MISSED!
RIP PABLO AKA FATHEAD.....YOU WILL BE MISSED!
Last edited by sleepinsol; Mar 16, 2008 at 07:39 PM. Reason: posted the chart
