distrubutor question Obd0-Obd1 conversion problems .....help!!
code 52!!
Thread Starter
Join Date: Apr 2006
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
distrubutor question Obd0-Obd1 conversion problems .....help!!
I just made some jumpers for my obd 0 car using this link----
Honda-Tech.com: Honda CRX / EF Civic: Non OBD to OBD1 conversion (By: Gold EF)
and triple checked it ......
the motor is a z6
i turn the key and it runs like shit for a few seconds then turns off....and my tach is jumping around from 6-8 grand at idle
anyone have any insight or ideas please lmk .....I"m not to sure about the dizzy its a gsr dizzy
CAN I RUN A GSR DIZZY ON A SOHC??????.....IF NOT THAT IS MY PROBLEM
Thanks in advanced and all help will be rep'd thanks again
Honda-Tech.com: Honda CRX / EF Civic: Non OBD to OBD1 conversion (By: Gold EF)
and triple checked it ......
the motor is a z6
i turn the key and it runs like shit for a few seconds then turns off....and my tach is jumping around from 6-8 grand at idle
anyone have any insight or ideas please lmk .....I"m not to sure about the dizzy its a gsr dizzy
CAN I RUN A GSR DIZZY ON A SOHC??????.....IF NOT THAT IS MY PROBLEM
Thanks in advanced and all help will be rep'd thanks again
code 52!!
Thread Starter
Join Date: Apr 2006
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
And bite size I suggest buying one it took 5 hours to make with all the solder and heat shrink if you still wanna make it PM me and ill send you the rest of the links I used that helped
Last edited by Honda_Redemption; 01-11-2008 at 09:59 AM.
