My clutchin my 93 Da has been going out for a while and suddenly it would not shift into any gear when i was driving down 301.
Then i realized that my shifter would not got into 5th or reverse.

it felt like the linkage was loose as hell.
It would go into first ok.But when i shift to second It would go completly to the right.Like there is another gear there.
The car will start but no matter how hard i try the tranny will not go into any gear.

My friends have given me 3 possiblities.
1.the throw out bearing.
2.my snycro
3.my clutch

I need to know what is going on here,and how much snycros are for my teg.
I gotta get this thing running by sunday so any info on the matter would be helpful.

 

try and shift it with the car off....if that does not work thatn its most likely the linkage. if it does...try and start it up while in a gear like 2nd with your foot on the clutch. ...make sure theres nothing in front of you. if nothing weird happens try and start off in second....then let us know what all happened.

 

is the clutch slipping? sounds to me like its your linkage, maybe the stabilizer is loose. does the shifter "hang down" at all?

do what freakasis said and try to shift with the car off, if you have problems with that, its not the clutch. with the car on just try to push in the clutch and shift gears, if theres problems there, its a clutch related problem.

 

"My clutchin my 93 Da has been going out for a while..."

Sounds like you answered your own question.