xs turbo kit
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Every single one of them had a problem with the turbo or the manifold or both...
The charge piping couplers were cheap material, the fmic really does not perform well.
But hey, what do I know ?
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Thread Starter
Registered User
Joined: Jun 2006
Posts: 285
Likes: 0
Thread Starter
Registered User
Joined: Jun 2006
Posts: 285
Likes: 0
For your stock LS or any stock internal 1.6/1.8L:
Turbo manifold:
Inline Pro SS cast a/c compatible manifold or a mutek cast manifold.
Downpipe/Dump Tube:
Inline Pro or a custom fabbed d/p from a local shop or spoolin performance etc.
Turbo:
5 bolt precision sc34 or anything simular (t3/t4 5 bolt)
Charge piping:
Spoolin Performance Intercooler Piping Kit or have it fabbed locally
Wastegate:
Tial 38mm wg
Blow off valve:
Tial or anything else out there on the market besides ebay.
Injectors:
Precision 525cc injectors (high impedance)
Precision injector clips if needed
Fuel pump:
Walbro 255lph
Fuel management:
Obd2 to obd1 conversion harness if needed
Chipped obd1 ecu running your choice of an ems such as eCtune, Hondata, Neptune etc.
Intercooler: Precision 350 or Precision 600
Feed/Return lines: Look into a GE oil distribution plate or simply use a fast-turbo or stealthmode oil line kit. You can also DIY by visiting amazon hose.
Oil pan tapping: Buy a moroso oil pan for around $125-150 or have yours modded for around $40-60.
Turbo manifold:
Inline Pro SS cast a/c compatible manifold or a mutek cast manifold.
Downpipe/Dump Tube:
Inline Pro or a custom fabbed d/p from a local shop or spoolin performance etc.
Turbo:
5 bolt precision sc34 or anything simular (t3/t4 5 bolt)
Charge piping:
Spoolin Performance Intercooler Piping Kit or have it fabbed locally
Wastegate:
Tial 38mm wg
Blow off valve:
Tial or anything else out there on the market besides ebay.
Injectors:
Precision 525cc injectors (high impedance)
Precision injector clips if needed
Fuel pump:
Walbro 255lph
Fuel management:
Obd2 to obd1 conversion harness if needed
Chipped obd1 ecu running your choice of an ems such as eCtune, Hondata, Neptune etc.
Intercooler: Precision 350 or Precision 600
Feed/Return lines: Look into a GE oil distribution plate or simply use a fast-turbo or stealthmode oil line kit. You can also DIY by visiting amazon hose.
Oil pan tapping: Buy a moroso oil pan for around $125-150 or have yours modded for around $40-60.
__________________
2000 Acura Integra GS-T
2000 Acura Integra GS-T
No really,....it is
Joined: May 2006
Posts: 2,984
Likes: 0
everyone is right. i have heard nothing but bad things about xs. except the intercoolers, there are a couple people on here that say they like them. i think a couple of dms guys have them too. theres been about 4 threads started about this company. also, do a google search and you will find all the same responses you got in here. i ran one of there manifolds except i re-enforced all the welds and support brackets and never had a problem, but the way they come are poorly built with poor materials.
