Jonathan

just curious if anybody in the area has done the mini me head swap on the d15b2 or the d16a6 block if so was it a good decision or is it a waste of time i just want the info because the b16 is too expensive for me and the mini me is a very cost effective way to go in my opinion. although i have come across a b18a(enginetranny & ecu) for around 600 and was wondering if that was a good deal(not sure on pricing for this setup)

------------------
my car is slower than yours!

TampaTraps

i think the swap is good if you dont have any money i was goning to do it but i went b16 instead. if you get the head try to get 96-98 better cumbustion chamber and you can use your stock distributor.
you well need
vtec head compete
92+ ex or sohc si timing belt
92+ ex or si head gasket
vtec selniod
vtec controller
a coupole of other parts i will post links soon you should be able to get all parts for under $500

TampaTraps

here you go
http://www.geocities.com/one6mini_v/home.html
http://www.hybrid.honda-perf.org/tech/sohcvtec.html
http://www.geocities.com/c_rexboy/swap.html
http://www.geocities.com/motorcity/s...15/4gtech.html
http://www.angelfire.com/ca/DrOhm/hybrid.html

if you need any help with the install i will be willng to give you a hand.

Jonathan

cool thanks i would like to talk to you in person about the swap & since i am sure you will be out at the races this sat do you think we could meet up? if so just email me what kind of ride you have & where you want to meet up at.

movement88@aol.com



------------------
my car is slower than yours!