This is the Crx Si ECU correct?.....I figured so....My question is,is this Ecu Vtec ready?....like can I just hook up the vtec wire to the ecu and it be done????

I wasnt sure but heard of some non-vtec ecus being wired for vtec....

Lmk.Thanks


The motor is a mini-me...1.5 block and 1.6 head....

 

pm6 = non-vtec ecu from 1988-1991 Honda Civic/CRX SOHC Si
It is not setup for vtec...

 

So,what ECU can I use to run vtec?.....can I use the 92-95 ex?.....

Im wanting to get the ecu "chipped" soon....LOL....

Thanks.

 

Also,where can I find the diagram for the pin-outs to hook up vtec?

Rep for you mtber.

 

You can get your self a obd0 vtec ecu for the setup & run an obd0 distributor on the car....

Or you can get an obd0 to obd1 jumper harness, obd1 distributor & obd1 vtec ecu.

 

LOL.Your gonna have to "Dummy" it up for me alittle...lol...im not to familliar with the obdo obd1 references....but I think you mean obdo=88-91...and obd1=92-95...????

So,the ecu has to come from a 92-95 vtec,and the dizzy has to come from..???

LOL,yeah im not to familliar with the obd's and the years they coinside with.

Rep for your help...

 

what car is this in?

 

wanna sell your pm6? if so call me 813-458-4488

 

are you runnin a single cam or dual cam engine???

 

Nevermind......car is gone.......Thanks for the help though....