i have an OBD1 GSR to OBD0 CRX engine harness that was supposed 2 b made by john vega . it looks pretty clean . as i peeled the old GSR harness off i replaced the new harness plug by plug . i now have a few plugs that dont make any since on the new harness and i dont know where they go .
i was supposed 2 have an unreliable friend come by and take a look at it and well ya....
can i get a hand please ? i can pay for gas and time ! PLEEZ HELP !!! i have a crx thats dilated and needs birth thanx

 

what kind of motor you have in the crx, plugs could be for vtec solenoid, vtec oil pressure switch, etc. need more info.....

 

Peeling off engine harnesses? Plugs that don't make sense? As in don't fit, or don't know where they go, or you forgot what you are doing....more info.

 

its an obd 1 gsr going into an 89 crx . i took the stock harness off plug by plug , and put the new converted harness back on the motor . one plug i know is the o2 sensor , but thats only one of the plugs .
im really hoping someone local can just swing by !!!

 

If you wanna come by and scoop me up saturday I'll give you a hand! Or better yet! Call hasport and say you have one of their harness' and need help identifying the plugs in question. I called them about a question with my wiring and the guy knew right off the top of his head!

 

sweet thanx pm me ur number ok !!!

 

So you bought an OBD0 modified to OBD1 engine harness and you are not sure on the connectors and where they go? Who did you buy the harness from? Ask them? Post up pictures. There are many of us in here that can wire this stuff in our sleep, but can't help you out if you don't specify what is not working for you.

 

i got it from a guy that had a crx . id have dig up his screen name 2 b exact . i dont know if they would b much help . i can post pics of the areas i have questions thanx !