The p54 a/c bracket might not work with the crx a/c compressor like it does for 92+ d series compressors. I'm pretty sure you have to use the hasport or hcp a/c bracket.

 

i hope thats not the case...

any one that has done this..plz lmk...Maybe Mr LHT can let me know what he did for the crx b20vtec turbo they did?!?

 

I've done it two ways in the past:

Used a 90 teg compressor, lines, bracket. Worked great but I had to knotch the cross member to get it to fit. Motor used HCP mounts.

Used the stock crx a/c components and a hasport mount worked well, no knotching.

I've always been told that the crx a/c compressor will not bolt to the p54 bracket (different bolt pattern). I've never confirmed this though myself. Let me know how it goes if you already have the bracket.

 

mines the pr4 from a 90-93 integra i used it on my 2 motors i put into my hatch but i used a 00 si b16a2 compressor cause i changed it to r134 it fit perfect with even about 1" space to clear

 

but rang ..where u using crx compressor or b series?!?!...
i need to know before purchasing..and id HATE to spend almost 200 for a bracket from hasport..

 

i was useing the compressor from a Bseries b16a2 00si ..damn for 200bucks you can buy my bracket and a good compressor

 

so does anyone know for sure what bracket i need for d series a/c on b series block in a crx...plz i want a/c asap...

 

hasport i would say...kj knows his stuff

 

yea i was thinkin that too..but i was WISHING...there was something else cheaper..cuz im sure no one on here has a hasport bracket laying around for a good price..

 

there is my ac bracket.and a bseries compresor : o ) total about 85bucks maybe : o )