crx si d16a6 to d16z6
Thread Starter
Registered User
Joined: Jan 2007
Posts: 22
Likes: 0
crx si d16a6 to d16z6
i got a 89 crx si d16a6 that i want to put a d16z6 into it what do i need to change?what ecu then can i put the vtec on a switch?also will the tranny bolt up?thank's randy
i like the blue ones
Joined: Jul 2002
Posts: 380
Likes: 0
Get the rywire conversion harness and a P28 instead of a homemade switch and your stock ecu. Very easy upgrade.
HYBRID 4G Tech: 92-95 1.6L SOHC VTEC Swap
HYBRID 4G Tech: 92-95 1.6L SOHC VTEC Swap
__________________
Shut yo ass up nugguh..
ReginaVagina
Shut yo ass up nugguh..
ReginaVagina
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
That's a pretty good site.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
That's a pretty good site Hybrid eg.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
No really,....it is
Joined: May 2006
Posts: 2,984
Likes: 0
no thats a damn good site!!! very good quality harnesses and make things sooo much easier.
but to the op the tranny will bolt right up and drop right in. get that conversion harness and a p28 and your good to go. do not wire your vtec to a switch.
but to the op the tranny will bolt right up and drop right in. get that conversion harness and a p28 and your good to go. do not wire your vtec to a switch.
That's a pretty good site Hybrid eg.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
Rywire - Online Store has the ecu conversion harness and the P28 ecu so that you can control the vtec properly.
