where is the best place to get a clutch for my crx......and what would you recommend????

thanxx t.r

 

+1 i need to know the same thing plz crx si . need clutch.

 

my tranny says l3...that is crx si correct????

 

Yes...its either a jdm ZC tranny or a Si...they were both an L3...some had an optional LSD...pull the axles and look through the hole and if you can see through it and theres no pin in there you have a rare LSD equipped zc tranny...you most likely have a si one though...check though...im curious now..lol

 

Ok...here ya go...
for clutches: The Clutch Depot - ClutchDepot.com
for tranny info: L3 tranny
Rep luv?

 

Tampa Clutch Supply is off the chain. I got a heavy duty pressure plate for my integra for $190

 

aight so would the clutch be the same for both of them????? the motor in the car is a zc dohc......???? and how would i kno what year to look for for the clutch?

 

I think you get a 88-89 1gen integra clutch....

 

so then if i got one for a crx si it wouldnt work?????

 

here is some info...
what actual tranny is it? look above the oil fill, there is a stamp that will say PL3/####
PL3/A### = small bearing case - DX/HF/STD
PL3/B000 = large bearing - SI/ZC
PL3/3000/6000/9000 = large bearing - SI/ZC
as for clutches, as long as you have a 90-91 flywheel it will use a 90-91 SI clutch. unless the trans is an '88(21 spline input shaft)