Which Kit?
Thread Starter
Registered User
Joined: May 2007
Posts: 2
Likes: 0
Which Kit?
Ok the thing is I've been jumping back and forth between these two kits. The only real differance is the manifolds as far as I can tell.
Kit 1:Full-Race Motorsports LLC "Everything Else is Half Fast"
I like this kit but its more expensive and the manifold seems a bit shorter then the other one by Peak Boost. Of coarse I'm looking at photos so I can't tell for sure.
Kit 2:PeakBoost B-series Topmount Kit
Keep in mind on the Peak boost kit I'll be upgrading it to match the Full Race kit. From what I can tell the Full Race kit is 500 dollars more with the only differance being the manifolds.
Basically I was wondering what the rest of you think. Also give me a reason why you think that way. I don't want to see three pages of "Full Race FTW" just because its the only kit you know of or because its the cool thing to do.. Its not a cheap choice so I'd like to make a good one..
Kit 1:Full-Race Motorsports LLC "Everything Else is Half Fast"
I like this kit but its more expensive and the manifold seems a bit shorter then the other one by Peak Boost. Of coarse I'm looking at photos so I can't tell for sure.
Kit 2:PeakBoost B-series Topmount Kit
Keep in mind on the Peak boost kit I'll be upgrading it to match the Full Race kit. From what I can tell the Full Race kit is 500 dollars more with the only differance being the manifolds.
Basically I was wondering what the rest of you think. Also give me a reason why you think that way. I don't want to see three pages of "Full Race FTW" just because its the only kit you know of or because its the cool thing to do.. Its not a cheap choice so I'd like to make a good one..
Powered by BOOST
Joined: Apr 2002
Posts: 1,379
Likes: 0
My Full Race kit is nothing but quality. FR FTW
__________________
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
K series on crack
Street Car on 25PSI V V V V V V
http://www.youtube.com/watch?v=_sn1WsbI0UQ
S D M
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
I have been a FR promoter since before Geoff started his business. Their components are the best out there. I would get the FR kit man.
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Fr
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
swapin' Hondas since '95
Joined: Aug 2000
Posts: 4,603
Likes: 0
some technical answers in here
__________________
K20turbo EG hatch 10.49@136
street tuned by NS RACING
??check engine light?? Tranny grinds??I fix'em!!
I MAKE HOUSE CALLS!!
SAME DAY ECU CHIPPING
I <3 WIRES
NS RACING (813)842-5517
chipped P28's $125
http://www.youtube.com/watch?v=nbsSp...a_player<br />
http://www.youtube.com/watch?v=koGfpMAvfWk
http://www.facebook.com/neal.sutton.750
K20turbo EG hatch 10.49@136
street tuned by NS RACING
??check engine light?? Tranny grinds??I fix'em!!
I MAKE HOUSE CALLS!!
SAME DAY ECU CHIPPING
I <3 WIRES
NS RACING (813)842-5517
chipped P28's $125
http://www.youtube.com/watch?v=nbsSp...a_player<br />
http://www.youtube.com/watch?v=koGfpMAvfWk
http://www.facebook.com/neal.sutton.750
could be worse
Joined: Feb 2004
Posts: 11,421
Likes: 0
well everyone that has posted IMO is at the top of the honda game, I personally would listen to what the guy running 10.7's in a turbo honda, the guy running SUPER low 10's and one of the best tuners in the area
swapin' Hondas since '95
Joined: Aug 2000
Posts: 4,603
Likes: 0
if you want to follow, i guess thats fine for you.....and from what i have seen, they both use the same tial parts, same garret turbo, same size piping etc.....so basicaly the question should be which manifold is better.
__________________
K20turbo EG hatch 10.49@136
street tuned by NS RACING
??check engine light?? Tranny grinds??I fix'em!!
I MAKE HOUSE CALLS!!
SAME DAY ECU CHIPPING
I <3 WIRES
NS RACING (813)842-5517
chipped P28's $125
http://www.youtube.com/watch?v=nbsSp...a_player<br />
http://www.youtube.com/watch?v=koGfpMAvfWk
http://www.facebook.com/neal.sutton.750
K20turbo EG hatch 10.49@136
street tuned by NS RACING
??check engine light?? Tranny grinds??I fix'em!!
I MAKE HOUSE CALLS!!
SAME DAY ECU CHIPPING
I <3 WIRES
NS RACING (813)842-5517
chipped P28's $125
http://www.youtube.com/watch?v=nbsSp...a_player<br />
http://www.youtube.com/watch?v=koGfpMAvfWk
http://www.facebook.com/neal.sutton.750
Last edited by cxcivic; May 26, 2007 at 04:31 PM.
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
If the price difference is only $500 then go full race. Everything I've seen from them has been perfect with the exception of one prelude kit that didn't fit.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
If it was my vehicle, I would choose full-race.
Why ?
I have dealt/seen cars with both products & many products in the industry.
I have talked to other tuners in the nation which have used both of the products etc....
Full-Race's products are much more advanced then your average manifold company using a jig.
They use a lot of computer cad technology, robotic tig welding etc...
Why ?
I have dealt/seen cars with both products & many products in the industry.
I have talked to other tuners in the nation which have used both of the products etc....
Full-Race's products are much more advanced then your average manifold company using a jig.
They use a lot of computer cad technology, robotic tig welding etc...
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
