i have done many searches and have most info i need..this is for my OBDI 94 ls ecu

i know one wire from vtec solenoid goes to pin A4
and the wire for the pressure switch goes to pin D6

but on the light green plug on the solenoid unit itself, there are 2 prongs sticking out of the plug.. which one do i wire it to.. or does it matter.
looks like there would be 3 wires coming out..?

also i have my ecu reflashed so i wont need the knock sensor

thanks Dustin

 

maybe this will help..
ClubSi: Swapping Motors.......

 

 

sorry i labeled those wrong.. they are reversed.. but any way.. there are two pins on the switch..?

 

the second wire on the green plug is ground. Run it through the harness & ground it at the ground by the thermostat

 

thanks..! thats all i needed

 

np.......