B16 Issue With Vtec
Thread Starter
BALLER
Joined: Feb 2006
Posts: 665
Likes: 0
B16 Issue With Vtec
I Connected The 4 Wires And I Dont Feel Vtec.the Engine Light Was On Before I Wire It Up And Now It Is Off But No Vtec And No Codes. The Code Was 21 In A Ef Obd 0. If You Have Any Suggestion Help Me Out
cause the whistle goes...
Joined: Jul 2003
Posts: 3,741
Likes: 0
was the car warmed up? did you hook the 4 wires up to the ecu right? did you hook up the knock sensor? what ecu are you using?
__________________
R.I.P. Brian Nichols 02/07/1989-11/23/2008
R.I.P. Brian Nichols 02/07/1989-11/23/2008
Dude.. thats awesome.
Joined: Jul 2005
Posts: 435
Likes: 0
Requirements for vtec (to my knowledge)
above required rpm (obviously)
engine temp above 150 degrees
going faster than 13mph
If vtec was not working then, check all the connections you just did like 3 times, then go ask somebody who knows more than I do.
above required rpm (obviously)
engine temp above 150 degrees
going faster than 13mph
If vtec was not working then, check all the connections you just did like 3 times, then go ask somebody who knows more than I do.
hoollaa
Joined: May 2005
Posts: 2,294
Likes: 0
did you wire the knock sensor? try wiring the knock sensor!
__________________
