Tampa Racing

Honda/Acura Tech Honda tech discussion.

Help With Iacv

Thread Tools
 
Old Feb 5, 2007 | 08:22 PM
Share
  #1 (permalink)  
Grizzly0205's Avatar
Grizzly0205
Thread Starter
**BoTtLeS aRe 4 BaBiEs**
 
Joined: Jun 2006
Posts: 176
Likes: 0
Default Help With Iacv
ok.... I Noticed That My Idle Was Going Up And Down From About 1000 To 1500 After It Warmed Up....so I Took Off The Iacv And Noticed The Screen Was Completely Black So I Got Everything Out Of There And Cleaned It Real Good I Let It Air Dry About 30 Minutes... I Got It Put Back In And I Start Up The Car And Now The Car Idles At About 500.. I Have A 92 Integra With A B16... Any Help With Be Appreciated..
__________________
Reply
0
Old Feb 5, 2007 | 08:42 PM
Share
  #2 (permalink)  
mtber's Avatar
mtber
Registered User
 
Joined: Jan 2003
Posts: 5,450
Likes: 0
Default
Originally Posted by Grizzly0205
ok.... I Noticed That My Idle Was Going Up And Down From About 1000 To 1500 After It Warmed Up....so I Took Off The Iacv And Noticed The Screen Was Completely Black So I Got Everything Out Of There And Cleaned It Real Good I Let It Air Dry About 30 Minutes... I Got It Put Back In And I Start Up The Car And Now The Car Idles At About 500.. I Have A 92 Integra With A B16... Any Help With Be Appreciated..
You may have killed the iacv valve or made the clog worse...
Does it sound like the valve is working ?
__________________

Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Reply
0
Old Feb 6, 2007 | 02:35 AM
Share
  #3 (permalink)  
hondachris1994's Avatar
hondachris1994
hatchback1994
 
Joined: Mar 2006
Posts: 1,227
Likes: 0
Default
Thats how I cleaned mine, do u have a CEL on? Also did u plug the IACV connector back in, and did u hook both lines back up?
Reply
0
Old Feb 6, 2007 | 03:09 AM
Share
  #4 (permalink)  
Grizzly0205's Avatar
Grizzly0205
Thread Starter
**BoTtLeS aRe 4 BaBiEs**
 
Joined: Jun 2006
Posts: 176
Likes: 0
Default
I believe its working but when i took it off it only had one bolt in it you think that will cause something like that???
__________________
Reply
0
Old Feb 10, 2007 | 12:36 PM
Share
  #5 (permalink)  
0gravity's Avatar
0gravity
Registered User
 
Joined: Jan 2007
Posts: 37
Likes: 0
Default
vacum leak?
Reply
0
Old Feb 10, 2007 | 08:52 PM
Share
  #6 (permalink)  
skunk2racing97's Avatar
skunk2racing97
UF Mech/Aero Eng
 
Joined: Apr 2003
Posts: 1,787
Likes: 0
Default
uh, idle adjustment screw?

have you tried raising the idle per honda spec?
__________________

University of Florida Gators - '06 NCAA Basketball & Football - '07 NCAA Basketball
Reply
0
Old Feb 11, 2007 | 04:26 AM
Share
  #7 (permalink)  
TSX24L's Avatar
TSX24L
Registered User
 
Joined: Mar 2004
Posts: 5,211
Likes: 0
Default
if you used brake cleaner or carb cleaner you can damage the seal or deteriate the o-ring.
Reply
0
Old Feb 11, 2007 | 10:24 PM
Share
  #8 (permalink)  
Jdm-civic88's Avatar
Jdm-civic88
Registered User
 
Joined: Apr 2006
Posts: 460
Likes: 0
Default
i'm having the same problem
Reply
0
Old Feb 15, 2007 | 06:13 AM
Share
  #9 (permalink)  
94civicb16's Avatar
94civicb16
Registered User
 
Joined: Oct 2006
Posts: 2,220
Likes: 0
Default
me too
Reply
0
Old Feb 16, 2007 | 02:18 PM
Share
  #10 (permalink)  
b18civ's Avatar
b18civ
Registered User
 
Joined: Jan 2006
Posts: 202
Likes: 0
Default
vacuum leak or timing, if you wanna check the iacv put some voltage to the plunger to see if it opens, or is it closes? Anyways
Reply
0



Advanced Search

All times are GMT -8. The time now is 12:18 PM.