dsm injector help
Thread Starter
$$ = boost :( = NA
Joined: May 2003
Posts: 854
Likes: 0
dsm injector help
just for verification.
1. dsm bluetop 450cc injectors are compatible with OBDI honda clips?
2. i need to dremel the bottom injector seal on the manifold or use a new injector seal kit..? what seal for what vehicle?
3. and i have the resistor box..anything else?
thanks in advance
anthony
ive searched for days, aparently there are many methods, just lookin for advice
1. dsm bluetop 450cc injectors are compatible with OBDI honda clips?
2. i need to dremel the bottom injector seal on the manifold or use a new injector seal kit..? what seal for what vehicle?
3. and i have the resistor box..anything else?
thanks in advance
anthony
ive searched for days, aparently there are many methods, just lookin for advice
Last edited by el b18; Feb 3, 2007 at 07:44 PM.
Painter Extrodionaire
Joined: Mar 2004
Posts: 569
Likes: 0
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
just for verification.
1. dsm bluetop 450cc injectors are compatible with OBDI honda clips?
2. i need to dremel the bottom injector seal on the manifold or use a new injector seal kit..? what seal for what vehicle?
3. and i have the resistor box..anything else?
thanks in advance
anthony
ive searched for days, aparently there are many methods, just lookin for advice
1. dsm bluetop 450cc injectors are compatible with OBDI honda clips?
2. i need to dremel the bottom injector seal on the manifold or use a new injector seal kit..? what seal for what vehicle?
3. and i have the resistor box..anything else?
thanks in advance
anthony
ive searched for days, aparently there are many methods, just lookin for advice
2. You can use the factory seals. Sometimes the bottom oring needs to be honed out slightly.
3. You need to properly wire in a resistor box to run dsm low impedance injectors.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Registered User
Joined: Mar 2005
Posts: 3,651
Likes: 0
the dsm 450's are peak&hold and means it needs resistor box and the Saturaded injectors doesent need resistor box. i think thats right..lol..
anyways.. i've installed 450's with resistor box, in my cusions ride and its pretty simple.. go threw the steps 1 by 1. Look it up on Honda-tech.
anyways.. i've installed 450's with resistor box, in my cusions ride and its pretty simple.. go threw the steps 1 by 1. Look it up on Honda-tech.
__________________
Last edited by FC_V8; Feb 5, 2007 at 05:00 PM.
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
A 90 crx should have a resistor box installed already.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
