need fabricator!!! HELPP!!!
Thread Starter
Registered User
Joined: Nov 2006
Posts: 271
Likes: 0
need fabricator!!! HELPP!!!
i need to know some places or someone who can make a good bend i mean GOOD bend...its a sharp bend for my turbo downpipe so it misses my ac.....anyone knows ppl or place lmk ASAP
bored at work
Joined: Oct 2000
Posts: 4,263
Likes: 0
Go to LHT. They can take care of you.
__________________
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richey
pm me if you are interested in trying a free class at any of the gyms.
Don't bother giving me "rep", I won't return it and I think it is stupid.
Gracie Barra Clearwater
Gyms in Clearwater, St. Pete and Port Richeypm me if you are interested in trying a free class at any of the gyms.
Retired Ricer...
Joined: Jan 2003
Posts: 11,813
Likes: 0
pie cut ftw
__________________
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
www.facebook.com/chris.storck1
Project WHIPLASH has begun!!!
RacingIntegration.com (813)935-6720
InductionPerformance.com
NS Racing (813)842-5517
Registered User
Joined: Jul 2002
Posts: 9,270
Likes: 0
+1
KJ. Hit me up tomorrow or I will call you later in the night. Want to see what's going on Saturday night
KJ. Hit me up tomorrow or I will call you later in the night. Want to see what's going on Saturday night
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Racerelated.com or Gulf Coast Turbo does good work also 
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Registered User
Joined: Sep 2003
Posts: 1,505
Likes: 0
buy a 90 bent pipe either 2 1/2 or 3" whatever you are runnning. trace the outline of the 90 onto a large peice of sturdy paper. use a ruler to divide the one 90 bend into numerous bends.
make the first line vertical before the bend for where it mates to the turbo, next mark 1 1/16 from the top of that line to the right on the drawn pipe. connect the bottom of the firt line to the top of the second mark. you now have a pie shaped pattern. next- go from the bottom line over 1 1/8 and make a dot, and connect the top of the last line to the dot. continue this process.
lable the first peice and every other as a number(ei: 1_2_3_ etc.) lable the peicec inbetween as letters. get them all done, cut out the shapes. trace all of them onto your actual 90 pipe. lable them well. cut them with a metal cut-off saw or band saw. once done, throw away the letter peices, and line up the numbers in their order(1234etc). you will now have a smooth flowing tight bend. HOPE YOU CAN WELD.
make the first line vertical before the bend for where it mates to the turbo, next mark 1 1/16 from the top of that line to the right on the drawn pipe. connect the bottom of the firt line to the top of the second mark. you now have a pie shaped pattern. next- go from the bottom line over 1 1/8 and make a dot, and connect the top of the last line to the dot. continue this process.
lable the first peice and every other as a number(ei: 1_2_3_ etc.) lable the peicec inbetween as letters. get them all done, cut out the shapes. trace all of them onto your actual 90 pipe. lable them well. cut them with a metal cut-off saw or band saw. once done, throw away the letter peices, and line up the numbers in their order(1234etc). you will now have a smooth flowing tight bend. HOPE YOU CAN WELD.
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
RRE Mandrel Bent Exhaust Bends and Intercooler Bends
http://www.roadraceengineering.com/p...rts/donuts.jpg
Buy the donut and cut what you need. The bend radius on those things are awesome!
http://www.roadraceengineering.com/p...rts/donuts.jpg
Buy the donut and cut what you need. The bend radius on those things are awesome!
Registered User
Joined: Jul 2002
Posts: 9,270
Likes: 0
Just to let everyone know. LHT has most of what you need instock
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
JUDGE RACING
Joined: Jul 2005
Posts: 1,614
Likes: 0
Do not go to gulf coast turbo. This thread will explain why http://http://club3g.com/forum/showthread.php?t=72782
__________________
Stock turbo/Stock Block- 10.80@125.97mph
FP Red/Stock Block- 10.301@132.93mph
http://www.youtube.com/watch?v=k2CqirgpFeM
Hta3582 w-.63Tial/Stock Block- 9.96@139.83mph
http://www.youtube.com/watch?v=rxjaKUnUZNk
Tampa's Quickest Mitsubishi
JUDGE RACING
Join us on Facebook
http://www.facebook.com/#!/pages/Judge-Racing/203463879689026
Sponsored by:
MAPerformance
Stock turbo/Stock Block- 10.80@125.97mph
FP Red/Stock Block- 10.301@132.93mph
http://www.youtube.com/watch?v=k2CqirgpFeM
Hta3582 w-.63Tial/Stock Block- 9.96@139.83mph
http://www.youtube.com/watch?v=rxjaKUnUZNk
Tampa's Quickest Mitsubishi
JUDGE RACING
Join us on Facebook
http://www.facebook.com/#!/pages/Judge-Racing/203463879689026
Sponsored by:
MAPerformance
