Need Help. Just a small question.

Reply Subscribe

Thread Tools

Dec 8, 2006 | 12:48 PM

#1 (permalink)

bravesoccer06

Thread Starter

Registered User

Joined: Oct 2006

Posts: 478

Likes: 0

Need Help. Just a small question.

Ok i have a 95 civic ex and was wonderin if i order the yellow fog lights, how do they mount into my bumper? and is the wiring really hard.

Dec 8, 2006 | 02:41 PM

#2 (permalink)

a10secstreetcar

Registered User

Joined: Jan 2005

Posts: 1,654

Likes: 0

Depends Does the bumper have a factory spot for them? If so well there is your mounting spot. About the wiring depends on were you bought them (what kit).If they are a stock kit I think you will also need the fog light switch in the car to?(not sure on that one)

Dec 8, 2006 | 03:19 PM

#3 (permalink)

bravesoccer06

Thread Starter

Registered User

Joined: Oct 2006

Posts: 478

Likes: 0

it has a spot but there is like some little like bumper moldings in the way. but on ebay it comes wid the switch.

Dec 13, 2006 | 04:58 PM

#4 (permalink)

senor honda

Registered

Joined: May 2005

Posts: 104,820

Likes: 21

If you want someone to look at it, pm me. I can show you how to wire it. no charge.-Bob

Quote:

Originally Posted by bravesoccer06

Ok i have a 95 civic ex and was wonderin if i order the yellow fog lights, how do they mount into my bumper? and is the wiring really hard.

__________________
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to Bobfixesitup@yahoo.com
________________________________________________

Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html
Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202

Veterans and Friends on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331

Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114

50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here: https://carstoshow.com/eventdetails.aspx?eventid=93194

All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html

Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/

Dec 13, 2006 | 05:24 PM

#5 (permalink)

Cold_Beer

Rockin' 4 more Cylinders

Joined: Apr 2004

Posts: 11,897

Likes: 0

Quote:

Originally Posted by bravesoccer06

Ok i have a 95 civic ex and was wonderin if i order the yellow fog lights, how do they mount into my bumper? and is the wiring really hard.

if your talking about these fogs

you cut out the spot on the bumper where they are, just cut then test fit, then the fogs bolt into factory bolt holes with 10mm's. The wiring is straight forward, most kits come with good directions.

__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07

_Jake D

Dec 13, 2006 | 05:58 PM

#6 (permalink)

HondaHouse

IS AT THE DEALERSHIP NOW

Joined: Aug 2006

Posts: 990

Likes: 0

If your using the factory wiring...its all plug and play..just did it to wifes car...wiring is all there from factory on an ex..hers is a 94....subharness goes between headlight switch and foglight switch....and outside there is a little barrel plug behind the drivers headlight in the area of the washer resevoir...blue in color...other than just cutting..the outline is there from the factory on the back of the bumper...very very easy, just cut it with an air saw...and enjoy

__________________