Honda/Acura Tech Honda tech discussion.

Avid Vs Hasport vs Cheap EBAY mounts.

Thread Tools
 
Old Dec 6, 2006 | 06:39 AM
  #1 (permalink)  
Cold_Beer's Avatar
Thread Starter
Rockin' 4 more Cylinders
 
Joined: Apr 2004
Posts: 11,897
Likes: 0
Default Avid Vs Hasport vs Cheap EBAY mounts.

I just got thru finishing a swap in my car. When i was first doing the swap i was at a toss up on what mounts i wanted to use. I have had several swapped cars in the past and have probly used any kind of mount option you can think of.

I have used OEM mounts, Hasport mounts ( old and new ) And cheap ebay knock offs.

Everyone was telling me to run The cheap EBAY mounts and yes i have used them before and i wasnt impressed with them at all, the urethane rips, the welds crack etc: ( even though many people on here swear by them, in the long run they SUCK )

WIth my current build i have chose to go with AVID billet mounts, at first i was kinda sceptical because they look just like hasports and i was thinking they were juist going to be some sort of knock off ....Well, i went ahead and ordered them ( 250 shipped ). I get the mounts and the QUALITY is great, they bling, the urethane looks good and they come with all the bolts needed.

Avid Racing - Premier Accessories for Honda and Acura Swaps <-- for some reason avids site isnt showing the billet ones, but they DO make them. Ignore those prices the are MSRP

Well i start putting the mounts in (My car is a EF btw), i bolt the tranny mount to the trans, and i get to looking at it and its a 2 peice mount =0, it made it alot easier to bolt in/out cause how it was postioned ( unlike the hasport) so i thought it was great, the rear mount is just like the hasport, driver side mount was nice. Then i got to looking, these mounts sits alot lower then the Hasports yet still get good ground clearance ( you also have to bang the lip down on the rear X member to clear the tranny bracket ).

Now with all that aside, hasport DOES make good mounts ( duh ) but for the price , the avids are GREAT and the urethane is great. Hasport also has a life time warrenty and their mounts ( im not sure if avid does )

But yeah the moral of this story. EBAY cheap mounts suck. I hope this helps people out when looking for mounts for their car.

Also AVID came out with a K swap mount set also for EG's.......lets just say its alot cheaper too


_Jake
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07



_Jake D

Last edited by Cold_Beer; Dec 6, 2006 at 06:41 AM.
Reply
Old Dec 6, 2006 | 08:31 AM
  #2 (permalink)  
skunk2racing97's Avatar
UF Mech/Aero Eng
 
Joined: Apr 2003
Posts: 1,787
Likes: 0
Default

did you buy them through Avid or another supplier?

like u said, the MSRP isnt that much better than HAsport, but $250 shipped isnt too bad, so im wondering where you got the better price...

good info
__________________

University of Florida Gators - '06 NCAA Basketball & Football - '07 NCAA Basketball
Reply
Old Dec 6, 2006 | 02:01 PM
  #3 (permalink)  
Cold_Beer's Avatar
Thread Starter
Rockin' 4 more Cylinders
 
Joined: Apr 2004
Posts: 11,897
Likes: 0
Default

Originally Posted by skunk2racing97
did you buy them through Avid or another supplier?

like u said, the MSRP isnt that much better than HAsport, but $250 shipped isnt too bad, so im wondering where you got the better price...

good info
I got them thru Ebay.....but the thing is even the GOOD price from hasport is like 350 or some shit. Even the price, if i couldnt get the avids for the good price, i would still get them over hasport.
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07



_Jake D
Reply
Old Dec 6, 2006 | 03:29 PM
  #4 (permalink)  
TSX24L's Avatar
Registered User
 
Joined: Mar 2004
Posts: 5,211
Likes: 0
Default

Avids get my vote, hasports are pretty but avids hold up well in the long run and are cheaper. Ebay mounts ive only purchased once and the welds to start to get stress cracks and the urathane seems cheaper. Ive never heard anyone sending their mounts back to hasports with a problem and there no welds look nice but the price your paying is for looks. The function and fit are the same and install in easy also.
Reply




All times are GMT -8. The time now is 01:31 PM.