EG driverside mount?

Reply Subscribe

Thread Tools

Nov 20, 2006 | 02:26 PM

#1 (permalink)

hondachris1994

Thread Starter

hatchback1994

Joined: Mar 2006

Posts: 1,227

Likes: 0

EG driverside mount?

What tool(s) do I need to change this mount and how hard is it? Its not broke but the rubber inside is starting to come out..BTW eg with B-Series

Nov 21, 2006 | 01:31 PM

#2 (permalink)

hondachris1994

Thread Starter

hatchback1994

Joined: Mar 2006

Posts: 1,227

Likes: 0

Do I need to place a jack to rest the engine on or will the motor stay in position without using a jack?

Nov 22, 2006 | 04:11 PM

#3 (permalink)

CFP_IVAN

CFP was...

Joined: Jan 2004

Posts: 242

Likes: 0

use a jack with a 2x4 piece of wood in betwen. raise until you see engine lift a half an inch, then you can remove the mount is a 17 or a 14 or both.

Nov 22, 2006 | 05:13 PM

#4 (permalink)

hondachris1994

Thread Starter

hatchback1994

Joined: Mar 2006

Posts: 1,227

Likes: 0

Quote:

Originally Posted by CFP_IVAN

use a jack with a 2x4 piece of wood in betwen. raise until you see engine lift a half an inch, then you can remove the mount is a 17 or a 14 or both.

Where do I put it to jack it up? I was told use the 2x4 and jack and raise it from the oilpan, but that doesnt seem rt and im not tryin to bend the oilpan..ant help is appreciated ...thanx

Nov 22, 2006 | 06:24 PM

#5 (permalink)

CFP_IVAN

CFP was...

Joined: Jan 2004

Posts: 242

Likes: 0

Quote:

Originally Posted by hondachris1994

Where do I put it to jack it up? I was told use the 2x4 and jack and raise it from the oilpan, but that doesnt seem rt and im not tryin to bend the oilpan..ant help is appreciated ...thanx

OIL PAN WILL BE FINE. DONE IT MORE THAN A HUNDRED TIMES.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last