i have a 91 crx si but my stock b16 tranny motor mount does not align at all with the car bracket did anyone had this problem before and might have a solution..........

 

if its the tranny side,you will have to drill it out and reweld a 90-93 integra bracket in its place.its kinda pain in the ass but you have to do it with the motor in the car.PM me with a number and will give you more details,we have done these a bunch of times.........

 

the number is 863-205-6862 could reach me for sure before 4:00 p.m.

 

...or you could buy swap mounts, instead of the possibility of having incorrect engine alignment where the motor will be slanted therefore so will the trany and your axles wil not line up correctly. Yes, it will work, but you have a greater chance of popping axles.

 

Yeah, if the motor doesn't line up right you will be haveing alot of problems with aligning everything really. Like smokins13r20 said your axles will be poping left and right. Just make sure to get aftermarket mounts and see where you could go from there. You could order them from any where, Hasport would be a place to go and there is many more other place and companys that sell mount kits. But try figureing out if the motor will sit in properly.

 

buy swap mounts..only hasport or arizona race machine....and linkage

 

Their's a reason why companies like hasport sell swapmounts. Saves you the time of cutting/welding (not to mention that some of that is irreversible if you cut/weld). The hasport mounts will allow the engine to sit in their as if it was a OEM SiR.

 

oem bracket $25,and what ever your welder charges.The hasport bracket pushes the engine forward anyways.So there you go.

 

This isnt 1998 anymore, swap mounts are 100$ shipped off ebay. and you dont have to worry abotu your motor falling out of your car....