crx into b20 help
crx into b20 help
ok i have a 91 CRX and i ordered a 97 b20 off Hmotorsonline....i have a ys1 tranny on it and its danglin above teh car..the problem is the driver side mount isn't quite workin...we have the b into ef mounts...just was wondering what bracket i use...has someone used the stock b20 bracket thats under the cam gear on the swap mount or do i use a LS-b16 or wich one ??? thanks
You have to use the bracket off a 90-93 LS.
Also, you cant slam the car w/ a b20 in it, because the crank pulley on a b20 is bigger then a LS, and the crank pulley rubs the radius arms if its too low.
Also, you cant slam the car w/ a b20 in it, because the crank pulley on a b20 is bigger then a LS, and the crank pulley rubs the radius arms if its too low.
__________________
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
RIP Kevin Gonzales AKA Slo_Si 9/06
RIP Robert Kolp aka 00ek 4/07
RIP Pablo Garcia aka FatHead 9/07
_Jake D
+1 to that
__________________
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother
R.I.P. Kevin Gonzales Aka Slo_Si
You will be missed by many.
R.I.P. Robert Kolp Aka 00ek
You will be missed brother
R.I.P Jake D Aka Cold_Beer
you will be missed brother