i got a s80 tranny and my clutch kit dont fit.the clutch i bought it for a gsr cuz thats the motor that came in the car and it dont fit does any one know what tranny this came out of.

 

I believe all the b series pressure plates are interchangeable,the clutch disc is different. Cable trannies i think have different input shaft splines than hydro ones so discs are not the same.
If you ordered a gsr clutch and it wont fit, you may be using a ls cable tranny. Cable B16 trannmissions also...

 

[quote=Pyroproblem;3484337]I believe all the b series pressure plates are interchangeable,the clutch disc is different. Cable trannies i think have different input shaft splines than hydro ones so discs are not the same.
If you ordered a gsr clutch and it wont fit, you may be using a ls cable tranny. Cable B16 trannmissions also...[/quote

my tranny is a hydro tranny but the clutch could be for a cable. the disk haves a shaft hole that is small my s80 is big shaft...

 

I Think The S80 Is A Ls Tranny If I Remember Correctly

 

S80 = hydrolic LS tranny

 

s80 can be a couple different trannies.....

Ls. itr, ctr etc. Does it have a vin plate on it?

The only clutch's that have diff spline, is small spline 90-91 and i think 00si.

 

s80 stamped case could be LS, GSR or ITR.

Sounds like you have a -91 clutch disc if your disc has a smaller whole than th etranny input shaft. If it came as a kit the throw-out bearing will be different also.


Jake beat me to it! The sc4 's a(99-00 b16) are big spline also.

 

all B-series hydrolic clutches are interchangeable, some thing with cable, B-series.

hydrolic have a bigger spline, and difference in the teeth

 

No, they are not all the same. Don't give misleading information.

 

fkin vicodin