Honda/Acura Tech Honda tech discussion.

injector/fuel rail help

Thread Tools
 
Old Jul 21, 2006 | 05:05 PM
  #1 (permalink)  
luvsracin87's Avatar
Thread Starter
turbo hhhmmmm?
 
Joined: Jan 2004
Posts: 702
Likes: 0
Default injector/fuel rail help

i just bought a gsport fuel rail, and when i went to in stall it the stock injectors didnt fit like the injector isnt long enuff. so i looked at the bore in the rails where the injectors go and the gsport bores are a little bigger so do i need to just shop around for bigger injectors, or is there some kinda o-ring or bushin that goes it there??
__________________
Steve: (813) 810.4146 <~ call or text
Reply
Old Jul 21, 2006 | 05:11 PM
  #2 (permalink)  
DOHC16CRX's Avatar
CARPET GUY
 
Joined: Aug 2003
Posts: 2,230
Likes: 0
Default

I had to take the washers/spacers off the rail that space it up and it will bolt down fine..just try that and it will work.
__________________
EATING FORDS-SHITTING CHEVY'S

MOBIL 1 LUBE
11210 Causeway Blvd. Brandon 33511
813-661-7284 shop
813-476-8015 cell
813-347-0291 cell

Head Mechanic
At the Mobil 1 Lube in brandon we service all your automotive needs.Specialize in Honda/Acura. B series swaps etc. No job to big or small.We are located right in front of Walmart. Ask for Nate.
Reply
Old Jul 21, 2006 | 05:20 PM
  #3 (permalink)  
luvsracin87's Avatar
Thread Starter
turbo hhhmmmm?
 
Joined: Jan 2004
Posts: 702
Likes: 0
Default

i wish there were some washers or spacers but there isnt
__________________
Steve: (813) 810.4146 <~ call or text

Last edited by luvsracin87; Jul 21, 2006 at 05:22 PM.
Reply
Old Jul 22, 2006 | 05:30 AM
  #4 (permalink)  
60-1EK's Avatar
Engineer at the source
 
Joined: Jun 2003
Posts: 2,722
Likes: 0
Default

You can get larger o-rings......but why did you buy this rail again?
__________________
JESUS SAVES


9.69@151 Street Car
JKOBD
Reply
Old Jul 22, 2006 | 05:55 AM
  #5 (permalink)  
luvsracin87's Avatar
Thread Starter
turbo hhhmmmm?
 
Joined: Jan 2004
Posts: 702
Likes: 0
Default

bigger o-rings, ill try that..............i bought the rail cuz i was planning on a turbo set up, but i thought i should upgrade my fuel and ignition systems first
__________________
Steve: (813) 810.4146 <~ call or text
Reply
Old Jul 22, 2006 | 10:12 AM
  #6 (permalink)  
60-1EK's Avatar
Engineer at the source
 
Joined: Jun 2003
Posts: 2,722
Likes: 0
Default

Originally Posted by luvsracin87
bigger o-rings, ill try that..............i bought the rail cuz i was planning on a turbo set up, but i thought i should upgrade my fuel and ignition systems first
Are you upgrading to braided lines on your fuel system? If not....then the stock rail will work fine. Also, the stock ignition is good to well over 500whp.
__________________
JESUS SAVES


9.69@151 Street Car
JKOBD
Reply




All times are GMT -8. The time now is 02:19 AM.