need help- torque lbs for head cylinder bolts
Dorado, PR
Thread Starter
Join Date: Dec 2005
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
need help- torque lbs for head cylinder bolts
i will be changing my head gasket and need to know when i go and put it back how much torque lbs will i need to set the bolts?
__________________
EFI Tech/Tuner
Join Date: Aug 2005
Posts: 1,217
Likes: 0
Received 0 Likes
on
0 Posts
What motor, which bolts, OEM or aftermarket? and which headgasket...
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
Guest
Posts: n/a
Get a book. I don't remember what they are supposed to be. 72ft/lbs maybe?
According to autozone's specification's site. This is the proper toque down for a 1995 Z6 head.
Home
HEAD BOLT TORQUE
For your 1995 HONDA CIVIC:
HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE)
TORQUE SEQUENCE:
----------------
| 8 6 2 4 10 |
| |
| 9 3 1 5 7 |
----------------
FRONT OF VEHICLE
STEP 1: TORQUE TO 22 FT/LBS
STEP 2: TORQUE TO 53 FT/LBS
According to autozone's specification's site. This is the proper toque down for a 1995 Z6 head.
Home
HEAD BOLT TORQUE
For your 1995 HONDA CIVIC:
HEAD BOLT TORQUE FOOT POUNDS (FINAL TORQUE)
TORQUE SEQUENCE:
----------------
| 8 6 2 4 10 |
| |
| 9 3 1 5 7 |
----------------
FRONT OF VEHICLE
STEP 1: TORQUE TO 22 FT/LBS
STEP 2: TORQUE TO 53 FT/LBS
EFI Tech/Tuner
Join Date: Aug 2005
Posts: 1,217
Likes: 0
Received 0 Likes
on
0 Posts
ARP headstuds require diffrent TQ settings, are the bolts OEM or aftermarket, And I know its a headgasket, but what KIND???
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
EFI Tech/Tuner
Join Date: Aug 2005
Posts: 1,217
Likes: 0
Received 0 Likes
on
0 Posts
Ok so with that said you need to tighten them in 3 steps
1st Time.....14FTLB's
2nd Time....36FTLB's
3rd Time.....49FTLB's
just make sure you use a good TQ wrench!!!
1st Time.....14FTLB's
2nd Time....36FTLB's
3rd Time.....49FTLB's
just make sure you use a good TQ wrench!!!
__________________
Modified Racing
Street Tuning & Dyno Tuning the greater east coast area for over 10 years and running!
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
AEM/HONDATA/MOTEC/FAST/DEFI & More
EFI-101 Certified
(941)628-4988
