Custom Turbo Fabrication on S2000
Thread Starter
Go Fast Crack Pipe
Joined: Mar 2004
Posts: 266
Likes: 0
Custom Turbo Fabrication on S2000
Our latest project 2003 S2000 stock F20C engine. Just wanted to show off a bit.
Stock F20C
GT 35R
Tial Wastegate & BOV
Custom Equal Length Header
4" Downpipe
4" to 3" Testpipe
3" Custom Single Exit Exhaust
Custom Head Gasket
H23 ARP Head Studs
Of Course, AEM EMS linked to a custom Boost Control and UEGO fed back to the EMS
Est. 490 horsepower, fast enough but not crazy. Enjoy!
Stock F20C
GT 35R
Tial Wastegate & BOV
Custom Equal Length Header
4" Downpipe
4" to 3" Testpipe
3" Custom Single Exit Exhaust
Custom Head Gasket
H23 ARP Head Studs
Of Course, AEM EMS linked to a custom Boost Control and UEGO fed back to the EMS
Est. 490 horsepower, fast enough but not crazy. Enjoy!
__________________
"It's OK to Smoke V-8's" - Surgeon General
www.2NRWerks.com - NSX, S2000 & RSX specialist. AEM, Hondata Kpro & Crome tuning provider. Custom built F, K & B series motors. Custom "Safe" Nitrous Kits and NOS Refills (While-U-Wait). Suspension/Brake Specialists & Alignments for lowered cars. On the quest for 700whp S2000 roaming the streets early Spring.
To Schedule An Appointment Call: (813) 876-VTEC
<< Reputations are so overrated! Don't hate on me 'cause I build fast cars.
"It's OK to Smoke V-8's" - Surgeon General
www.2NRWerks.com - NSX, S2000 & RSX specialist. AEM, Hondata Kpro & Crome tuning provider. Custom built F, K & B series motors. Custom "Safe" Nitrous Kits and NOS Refills (While-U-Wait). Suspension/Brake Specialists & Alignments for lowered cars. On the quest for 700whp S2000 roaming the streets early Spring.
To Schedule An Appointment Call: (813) 876-VTEC
<< Reputations are so overrated! Don't hate on me 'cause I build fast cars.
Last edited by NSXtacy; Oct 29, 2006 at 04:52 PM.
VTEC Out
Joined: Jul 2002
Posts: 10,022
Likes: 0
So you fabricated the entire turbo kit ?
Looks nice but also looks like a Full-Race kit
Looks nice but also looks like a Full-Race kit
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
TR Balla Donor Supreme
Joined: May 2004
Posts: 2,478
Likes: 0
wow, very impressive!! Did you guys make the manifold yourselves?
__________________
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
Thread Starter
Go Fast Crack Pipe
Joined: Mar 2004
Posts: 266
Likes: 0
Originally Posted by Blown99civicSi
^^^ When did they say they fabed the Kit?? All they were saying was this was another build they were working on, BTW Todd, saw that beast today, U were out 
lookin good besides the fact the turbo kit didnt ........... Rick made a good point about having cody flying down to get things right... anyhoo, when its done LMK I wanna take a stab at that sucker G/L and have fun 
lookin good besides the fact the turbo kit didnt ........... Rick made a good point about having cody flying down to get things right... anyhoo, when its done LMK I wanna take a stab at that sucker G/L and have fun Wow people here are quick to discredit anyone who posts something they are working on or the car they own.
John, you are right, I never said we fabed this in the post, I said it was custom fabbed meaning someone custom makes this in small quantities and it was special ordered and we have the opportunity to build, install and tune this car. BTW this is the customer's 2nd car we had our hands on and he lives 3 hours outside of the Tampa area.
I also said this will make good horsepower, but I'm not looking to be the baddest on the street either for you guys once again looking to challenge this car or any other cars that roll out of my shop. We do this because we love building & customizing cars.
Now John we both know your car is a beast, pick on someone your on size
__________________
"It's OK to Smoke V-8's" - Surgeon General
www.2NRWerks.com - NSX, S2000 & RSX specialist. AEM, Hondata Kpro & Crome tuning provider. Custom built F, K & B series motors. Custom "Safe" Nitrous Kits and NOS Refills (While-U-Wait). Suspension/Brake Specialists & Alignments for lowered cars. On the quest for 700whp S2000 roaming the streets early Spring.
To Schedule An Appointment Call: (813) 876-VTEC
<< Reputations are so overrated! Don't hate on me 'cause I build fast cars.
"It's OK to Smoke V-8's" - Surgeon General
www.2NRWerks.com - NSX, S2000 & RSX specialist. AEM, Hondata Kpro & Crome tuning provider. Custom built F, K & B series motors. Custom "Safe" Nitrous Kits and NOS Refills (While-U-Wait). Suspension/Brake Specialists & Alignments for lowered cars. On the quest for 700whp S2000 roaming the streets early Spring.
To Schedule An Appointment Call: (813) 876-VTEC
<< Reputations are so overrated! Don't hate on me 'cause I build fast cars.
Retired Street Racer
Joined: Mar 2003
Posts: 1,372
Likes: 0
Looks like a fun car man. Good Luck with it. Definitely post some #s up when the car is done.
Yea, dont worry about the people on here, They discredit any chance they can get, its crazy.
Yea, dont worry about the people on here, They discredit any chance they can get, its crazy.
__________________
My Old Honda
My Old Honda
Retired Street Racer
Joined: Mar 2003
Posts: 1,372
Likes: 0
Originally Posted by shimano
That is a love-fab kit, you guys didn't fab shit besides bolting it on.
__________________
My Old Honda
My Old Honda
TR Balla Donor Supreme
Joined: May 2004
Posts: 2,478
Likes: 0
I wasnt trying to discredit anyone, sorry if my post came off that way. I was just wonduring. I work at Tampa hondaland and have talked to one of the guys over there at 2nrwerks and have had a few of their customers in here and seen their cars. Very nice work and the guy i talked to was pretty cool and down to earth.
__________________
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
http://www.inductionperformance.com/
R.I.P
Kevin "Slo_Si" Gonzalez
6/21/86-9/13/06
Pablo Garcia
9/28/85-9/05/07
You will be missed and remembered forever!!!!
