Can one of you go out and look at your dizzy harness?

i need to know the colors/locations of the wires coming FROM the dizzy to the engine bay harness...


asap. thanks




rep for whoever helps.

 

Black/Yellow-ignition wire, Yellow/Green -ignition input signal wire, Blue-rpm output wire, Orange-CYP P wire, White-CYP M wire, Orange/Blue-TDC P wire, White/Blue-TDC M wire, LT Blue- CKP P wire, LT Blue/Yellow-CKP M wire. If you need the pin-outs i can get those for you later on..?

 

well, i know what the COLORS are, i more kinda need something like....


white-yellow/black-blue-yellow/green
black-red-white/blue-darkblue


or whatever....thanks

 

Im just a little confussed sorry, do you need where they connect into the connector, or the pin-outs for them w.e..

 

i need the diagram for the harness plug ON THE DIZZY. it MUST be obd2b with 8 wires.

i was rewiring my obd1 dizzy to my obd2b plug, and i PULLED the wires out of the harness plug when i did it so i didnt have to solder and it'd be all oem and such, but i messed up, and now i have no idea what hole in the harness plug the original wires went.

 

pin 1-yellow/green, pin 2- blue/green, pin 3-orange/blue, pin 4-orange, pin 5-not used, pin 6-blue/yellow, pin 7-white/blue, pin 8- white.

 

that sounds like an obd2A dizzy, is it?

 

Bring it to neal

 

ill call him tomorrow and see if he can hook me up. he came out to my house to help me when it wouldnt start before.

he sat in my car for 3 seconds, and said he knew what the problem was.......i had the wrong conversion harness..

 

It is obd2b.