Alright i have this B16 motor no tranny. I want to put it in my 91 CRX DX where i would be taking out my D15B2 motor with tranny, i wanted to know. Can i put a B16motor with a DOHC ZC tranny and have it working fine?

 

if it bolts right up, it should be fine... wouldnt hurt anything to try

 

Yea thats what i'm thinking, so now i have to buy a ZC take the B16 motor and see if the ZC tranny hooks up directly to the b16, then have the d15 sold, to make some money off it, then sell the ZC motor to make money so i can buy a b16 tranny, before further complications and problems occur and then i can start on my LS/V-TEC project.

 

The DOHC ZC motor is a d-series block, so the tranny WONT bolt up to a b-series motor.

 

yeah d-series bolts up to d-series, and b-series bolts up to b-series

 

i seriously cant believe this was asked........

 

ttt ya you can

 

First of all this thread is old as fuck, second of all this is your very first post and you used it to spread false information. It might be possible with some custom adapter plate but thers no way it will BOLT UP