Best plugs to use for boosted gsr?
Thread Starter
once your bit, your done.
Joined: Aug 2003
Posts: 1,789
Likes: 0
Best plugs to use for boosted gsr?
Having a breaking up issue in my car as well as worrying about the high compression turbo setup, breaking up mostly in vtec... Bottom end is jdm gsr with b16 head. stock head gasket. just got a set of NGK iridium IX's BKR6EIX-11. Didnt gap em, I was wondering what to gap them too.
Also, the dizzy is throwing a cyp code. I have a spare sohc obd1 distributor, can I take the cyp sensor out of it? or should i just get another obd1 dizzy?
my current dizzy is an ls obd1, cut the peg so it will fit the vtec head, msd cap, coil.
do you think another stock dizzy will fix my problem? the spark plugs? or fixing the cyp sensor? thx.
Also, the dizzy is throwing a cyp code. I have a spare sohc obd1 distributor, can I take the cyp sensor out of it? or should i just get another obd1 dizzy?
my current dizzy is an ls obd1, cut the peg so it will fit the vtec head, msd cap, coil.
do you think another stock dizzy will fix my problem? the spark plugs? or fixing the cyp sensor? thx.
smokes weed...everyday.
Joined: Jan 2005
Posts: 5,616
Likes: 0
ngk brk7e's. gapped to .028-.030
for the dizzy code, not sure if you have a p28, but i know my p28 with crome pro took that code off.
goodluck
for the dizzy code, not sure if you have a p28, but i know my p28 with crome pro took that code off.
goodluck
__________________
I <3 RooR!!!!!!
TR "Old Skool EF" Member #121(aka#420)
I <3 RooR!!!!!!
TR "Old Skool EF" Member #121(aka#420)
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Originally Posted by BitbyStreetRacin
Having a breaking up issue in my car as well as worrying about the high compression turbo setup, breaking up mostly in vtec... Bottom end is jdm gsr with b16 head. stock head gasket. just got a set of NGK iridium IX's BKR6EIX-11. Didnt gap em, I was wondering what to gap them too.
Also, the dizzy is throwing a cyp code. I have a spare sohc obd1 distributor, can I take the cyp sensor out of it? or should i just get another obd1 dizzy?
my current dizzy is an ls obd1, cut the peg so it will fit the vtec head, msd cap, coil.
do you think another stock dizzy will fix my problem? the spark plugs? or fixing the cyp sensor? thx.
Also, the dizzy is throwing a cyp code. I have a spare sohc obd1 distributor, can I take the cyp sensor out of it? or should i just get another obd1 dizzy?
my current dizzy is an ls obd1, cut the peg so it will fit the vtec head, msd cap, coil.
do you think another stock dizzy will fix my problem? the spark plugs? or fixing the cyp sensor? thx.
#7 Heat Range BKR7E-11 [NGK-1283] gapped to .028-.030
CYP code = bad wiring or bad dizzy internals (magnets) replace the internal sensors with internals from another dizzy (doesnt matter vtec, non-vtec sohc or dohc) as long as its obd1 etc.
Good Luck.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
Originally Posted by mtber
CYP code = bad wiring or bad dizzy internals (magnets) replace the internal sensors with internals from another dizzy (doesnt matter vtec, non-vtec sohc or dohc) as long as its obd1 etc.
Also, what turbo are you running and stock block? Boost pressure? 7's do it for most setups but don't have all the details on yours.
Registered User
Joined: Jan 2003
Posts: 5,450
Likes: 0
Originally Posted by 60-1EK
Or OBD2. Doesn't matter.
Also, what turbo are you running and stock block? Boost pressure? 7's do it for most setups but don't have all the details on yours.
Also, what turbo are you running and stock block? Boost pressure? 7's do it for most setups but don't have all the details on yours.
__________________
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Authorized Dealer & Tuner for: Hondata, eCtune, Neptune, AEM, Crome, Precision Turbo, Omni Power, Walbro, Innovate & more. Dyno Tuning Services, Ecu Chipping, Chipped Ecus, Conversion Harnesses, Widebands, Fuel Injectors, Fuel Pumps, Map Sensors & more.
For more information visit http://www.Phearable.net or call 1-888-236-9831
Last edited by mtber; Mar 24, 2006 at 10:36 PM.
Engineer at the source
Joined: Jun 2003
Posts: 2,722
Likes: 0
Originally Posted by mtber
CYP code = bad wiring or bad dizzy internals (magnets) replace the internal sensors with internals from another dizzy (doesnt matter vtec, non-vtec sohc or dohc) as long as its obd1 etc.
Originally Posted by mtber
It does matter if he doesnt want to re-wire his engine harness plug again
