of course, the fpr i ordered is a firewall mounted one, so im kinda confused on how to install this.

I have an aem fuel rail, with both holes on the rail plugged(the random hole, and the fpr hole). I don't see anyplace that the hose from the fpr can go to?

i think i remember seeing a picture somewhere, and the aem rail had TWO males(one on each side), and the hose went to the one on the opposite side of the fuel line?

thanks

 

Are the holes tapped for a fitting?

 

Get a 1/8NPT or whatever size the fuel rail threading is to Barbed hose thingy from Discount/Home Depot and run a line from there to your FPR ...



If your rail has a closed cap on one end take it off and find the barb fitting for that and run it off there ...

 

ok, so the fpr has 2 big fittings, and one smaller one(for vacuum i guess)

what do the 2 bigger ones go to?

 

One should say Outlet , one should say Return ... It may have two "outlets" for a dual fed fuel system

 

doesnt say anything, ones on the bottom, and ones on the side.

 

bottom is probally return

 

ok, so i get the fitting from wherever, then the hose goes from fuel rail, to side of fpr, then out the bottom(return)...to where? thanks

 

return line off FPR goes to where the stock Return line went . It should be a hose that goes to a small barb down on the firewall/front crossmember ..

 

thanks dan, i remembered that after i went out side and actually looked at my car.